Checking for Cube Installation on Router

How I do check if cube is installed on my cisco gateway router 3925. Do I have to get additional session licenses for it
mebster82Asked:
Who is Participating?
 
Robert Sutton JrConnect With a Mentor Senior Network ManagerCommented:
Yes, according to Cisco that feature is installed on that image for that device. From 15.0 moving forward, ALL feature subsets will come loaded in the Universal image. However, it may not be activated via the SAL depending on what you specified when you ordered the device or the image.

You can find more information here:
http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985.html#wp9000807

However, if you understand SAL, and PAK then follow the link below to VERIFY your device license and what features are available with what you purchased. You will need to provide the PID and Serial# of the device in question.

http://www.cisco.com/go/license


Hope this helps.
|T|W|
0
 
Robert Sutton JrSenior Network ManagerCommented:
Is it an ISR router or? Can you post the software version(s) here please?
0
 
mebster82Author Commented:
We have it part of Cisco PBX platform. Would that qualify it as a Integrated service router
it has 3 Gigabit Ethernet interfaces
         384 Serial interfaces
        1 terminal line
   16 Channelized T1/PRI ports


Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE100/K9
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.