Solved

HyperV VMM 2012 R2 - Problem after Update Rolleup 1

Posted on 2014-02-01
5
2,863 Views
Last Modified: 2014-02-05
Hey

After installing Update Rolleup 1 (KB2919248 + KB2904712) - I now get the following errors:

(I did try to reinstall the Agent on the hosts - no success)

Error (2912)
An internal error has occurred trying to contact the fvrhyp03.MyDomain.local server: : .

WinRM: URL: [http://fvrhyp03.MyDomain.local:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_PerfFormattedData_Tcpip_NetworkInterface], Filter: []

Unknown error (0xc0000bbb)

Recommended Action
Check that WS-Management service is installed and running on server fvrhyp03.MyDomain.local. For more information use the command "winrm helpmsg hresult". If fvrhyp03.MyDomain.local is a host/library/update server or a PXE server role then ensure that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.


Error (2912)
An internal error has occurred trying to contact the fvrhyp01.MyDomain.local server: : .

WinRM: URL: [http://fvrhyp01.MyDomain.local:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_PerfFormattedData_Tcpip_NetworkInterface], Filter: []

Unknown error (0xc0000bbb)

Recommended Action
Check that WS-Management service is installed and running on server fvrhyp01.MyDomain.local. For more information use the command "winrm helpmsg hresult". If fvrhyp01.MyDomain.local is a host/library/update server or a PXE server role then ensure that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.


Error (2912)
An internal error has occurred trying to contact the fvrhyp02.MyDomain.local server: : .

WinRM: URL: [http://fvrhyp02.MyDomain.local:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_PerfFormattedData_Tcpip_NetworkInterface], Filter: []

Unknown error (0xc0000bbb)

Recommended Action
Check that WS-Management service is installed and running on server fvrhyp02.MyDomain.local. For more information use the command "winrm helpmsg hresult". If fvrhyp02.MyDomain.local is a host/library/update server or a PXE server role then ensure that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.


Warning (13926)
Host cluster FVRHYP2.MyDomain.local was not fully refreshed because not all of the nodes could be contacted. Highly available storage and virtual switch information reported for this cluster might be inaccurate.

Recommended Action
Ensure that all the nodes are online and do not have Not Responding status in Virtual Machine Manager. Then refresh the host cluster again.

Open in new window

0
Comment
Question by:mikeydk
  • 2
  • 2
5 Comments
 
LVL 38

Assisted Solution

by:Philip Elder
Philip Elder earned 250 total points
ID: 39828690
Verify the status of Windows Firewall. Domain, Private, or Public?

If using Native Teaming set Network Location Awareness to (Automatic - Delayed) to allow the team to set up and then NLA to start and detect the domain. This will allow the correct profile to be selected in the firewall.

Is the inbound port indicated set to allow on the nodes?

Philip
0
 

Author Comment

by:mikeydk
ID: 39828848
Hey

Windows Firewall is off. (Hosts and VMM server)
0
 
LVL 7

Accepted Solution

by:
Milind Koyande earned 250 total points
ID: 39829294
0
 

Author Comment

by:mikeydk
ID: 39834992
I have tried the suggested solution - no success.

I now have reinstalled all the hosts - no it Works Again ?!?
0
 
LVL 38

Expert Comment

by:Philip Elder
ID: 39836083
Are they inheriting some Group Policy settings that may be affecting things?

Philip
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Finding the IIS version 5 21
AD FSMO role placing consideration and best practice ? 3 46
File Screening 1 13
Internet explorer, Windows server 2012 8 26
My GPO's made for 2008 R2 servers were not allowing me to RDP into a new 2012 server by default.  That’s why I tried to allow RDP via Powershell, because I could log into a remote shell without further configuration. Below I will describe how I wen…
This article will review the basic installation and configuration for Windows Software Update Services (WSUS) in a Windows 2012 R2 environment.  WSUS is a Microsoft tool that allows administrators to manage and control updates to be approved and ins…
In this Micro Tutorial viewers will learn how to use Windows Server Backup to create full image of their system. Tutorial shows how to install Windows Server Backup Feature on Windows 2012R2 and how to configure scheduled Bare Metal Recovery backup.…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question