Solved

Sonicwall site-to-site VPN behind NAT

Posted on 2014-02-04
2
1,496 Views
Last Modified: 2014-02-10
I have a client who wants to set up a site-to-site VPN for a new office, Sonicwalls on both side. The issue is this -

The ISP for the new office only offers a private IP for the outside interface of the firewall.  The private IP will be statically NATed to a public IP by the ISP.

Can I just point the main office Sonicwall VPN configuration to that public IP and trust that things will work?

I've not seen this setup before, and there are some logistics involved.  I'd like to have a clue before I agree to give it a shot.
0
Comment
Question by:Khamma1
  • 2
2 Comments
 
LVL 25

Accepted Solution

by:
Diverse IT earned 500 total points
ID: 39847152
Hi Khamma1,

Yes, you will just use the public IP or the ISP's WAN for the VPN. The use of the ISPs LAN or your Gateway WAN is for better IP management & allocation.

Let me know if you have any other questions!
0
 
LVL 25

Expert Comment

by:Diverse IT
ID: 39847204
Glad I could help. Thanks for the points!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question