Solved

SRV Event ID 2012

Posted on 2014-02-05
3
508 Views
Last Modified: 2014-03-01
Hello,

We have a Windows Server 2008 R2 VS running as our file server on an ESX 5.1 box.

Over the last week, we've started to experience a flood of  "Event 2012, SRV" errors. When this happens, users cannot access files and some programs crash, ESPECIALLY on our Remote Desktop Services server. After about 20 minutes of waiting, or if we reboot the server, the flood stops and we are able to work as normal.

We are using Vipre antivirus and it's a very basic data network. Not sure if it's an issue with the ESX box or Server 2008 R2 but we could use some help getting to the bottom of this!

Our network configuration isn't that complex and looks to be correct. We are not segregating VLANs so the ESX hosts are on the same subnet. We have all the servers on the same Virtual Switch.

Any ideas or suggestions?
0
Comment
Question by:qualityip
  • 2
3 Comments
 
LVL 7

Expert Comment

by:Shahnawaz Ahmed
ID: 39836974
Dear friend,

please go and read Microsoft KB 2885205 , ITS NOT BECAUSE OF Esx but server related .
please check if you have event i.d 2020 or 2019 or 333 in the system logs.
check your Virtual memory,of the Server. May be you need yo allocate some,more amount
0
 

Accepted Solution

by:
qualityip earned 0 total points
ID: 39884520
We found that we had to disable TCP offloading on the NICs of both virtual machines.
0
 

Author Closing Comment

by:qualityip
ID: 39897017
Resolved ourselves
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Join & Write a Comment

A safe way to clean winsxs folder from your windows server 2008 R2 editions
In this article, I will show you HOW TO: Perform a Physical to Virtual (P2V) Conversion the easy way from a computer backup (image).
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now