Solved

wireless controllers and air-ap configuration

Posted on 2014-02-07
32
1,916 Views
Last Modified: 2014-02-07
i by buy cisco 2500 series wireless controllers with tow air-ap1242g-e-k9 i'm configuration the controllers  but i can not configuration  air-ap1242g-e-k9 i'm
how to add ip in air_ap and more info or what they do need to add
and  how to linked with control

0
Comment
Question by:mahmuod
  • 16
  • 16
32 Comments
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842036
The APs need to be upgraded to use Lightweight code.  At the moment they have Autonomous code on them (based on the part-code).  That means they won't connect to the WLC.

You should obtain a Cisco Service contract from your reseller to obtain the relevant software from Cisco.
0
 

Author Comment

by:mahmuod
ID: 39842156
yes I have 5 license  in my controller
But I can not configration ap devices
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842214
I understand you have licences, but that's not what I'm telling you.

Your APs need to run the Lightweight version of code.  At the moment they don't have that so you need to obtain the Lightweight code from Cisco.  The IOS code you're running on the APs doesn't link to a controller like the LWAPP code does, so you need to convert the APs to run the LWAPP code.

You should have purchased AIR-LAP1242G-E-K9 (note the LAP part in the SKU).

Here is the Cisco 1242 ordering guide section...

AIR-AP1242G-E-K9 - 802.11g non-modular Cisco IOS access point; RP-TNC; ETSI configuration

AIR-LAP1242G-E-K9 - 802.11g non-modular LWAPP access point; RP-TNC; ETSI configuration
0
 

Author Comment

by:mahmuod
ID: 39842525
this picture for my devises
ciscoi want make this configuration
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842612
I understand.

You can't use those APs with the 2500 WLC unless you put the Lightweight version of AP code on each AP.

Do you know how to connect to the console of the AP to see its configuration?
0
 

Author Comment

by:mahmuod
ID: 39842633
i am  connect to the console  and set user and password
put i can not configuration i want the command to configuration
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842657
Can you provide the show version output from the AP?
0
 

Author Comment

by:mahmuod
ID: 39842690
how to use APs with the 2500 WLC unless you put the Lightweight version of AP code on each AP.

21:39:18.202: %CAP
Base ethernet MAC Address: 68:EF:BD:C2:98:10cular userANDSHAKE_RETRANSMIT: 

*Feb  7 21:
Part Number                          : 73-11479-01e an Ip !!te to do326: %CAP
*Feb  7 
  lwapconfig 
PCA Assembly Number                  : 800-30493-01 doesb  7 21:31:54.821: %LINK-5-C
  name-connection
PCA Revision Number                  : A0 an Ip !!ctoriesLC is fals
*Feb  7 21:39:
PCB Serial Number                    : FOC14111PXNequest AP does-3-UPDOWN: Interfa
  radius         
Top Assembly Part Number             : 800-29586-03 an Ip !!
  release          Release a reso        
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) DHCP IPpor
  systat           Display information about terminal line
*Mar  1 00:00:06.738: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self tet terminal line parameterseb 
*F
*Feb  7 21:32:11.

*Feb  7 21:40:08.205:
 --Mo
est passedOG
*Feb  7
*Mar  1 00:00:08.159: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS selfeb  7 21:22:
 peer_ip: 192.16
not have an Ip !! 5246d state to D
*Feb  7
p: 192.
 test passed on interface Dot11Radio 0by CAPWAP OIN: sen
                   
AP68ef.bdc2.9810>clear
undergoing a cold start Type "clear ?" for a l
*Apr 10 19:29:20.091: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r##################
clear  crypto#############

AP68ef.bdc2.9810>cclearration mem
eset 20:
*Apr 10 19:29:20.929: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernr.################################## 7 21

AP68ef.bdc2.9810>cclearALERT: Send FA
et0, changed state to up8.274: %DTLS-5-SEND_ALER
*Apr 10 19:29:21.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radioequest AP do
*Feb  7 21:32:30.335: %CAPW
.168.9.254:5246PWAP change
###
*Feb  7 
0, changed state to downHANGED: CAPWAP changed s

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.2ED: CAPWAP changeer_p
                                             
Software clause at DFARS sec. 252.227-7013.PW

*Apr 10 19:29:42.912: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power ste to up %CAPWAP-3-ER
           170 West Tasman Drive 192.168.9.254 peer_port: 
ource
 

 
*Apr 10 19:29:42.913: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.


Cisco IOS Software, C1240 Softwa

AP68ef.bdc2.9810>cclear ?12.4(23c)JA3, RELE
255 started - CLI initiatedndFeb  7 21:32:48.433: %
AP
*Apr 10 19:29:43.388: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radiotp
% Invalid input detected at '^' marker..192: %CAPW
 peer_ip: 192.168.9.254 pe
0, changed state to up11 by Cisco Sy
*Feb  7
*Feb  7 21:59:18.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i prod_rel_teamDot11
*Feb  7 21:24:32.194: %CAPWAP-3-ERRO
                  ^h sy
p: 192.168.9.254 peer_port: 5246etected at '^' marker.ask interr
eason: Coul
  event
*Feb  7 21:59:37.714: bsnInitRcbSlot: slot 1 has NO radio with applica
*Feb  7 21:49:03.703: %CAPWAP-5-CHANGED: CA
*Feb  7 21:59:37.774: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to awith U.S. and local laws
*Feb  7 21:49:03.703: %CAPWAP-5-CHANGED: CAPWAP changed
dministratively downrdware specific info
*Feb  7 21:59:37.789: %PARSER-4-BADCFG: Unexpected end of configuration file.InitRcbSlot: slot 1 has NO radio1:17:08.635: %DTLS-5-SEND_ALERT: Send FATAL :

*Feb  7 21:59:37.817: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upadio0, changed state to up7 21:33:06.
120K bytes of memory.T: Send FATAL : Close

*Feb  7 21:59:43.791:  status of voice_diag_test from WLC is falseterface Dot11Radio0, changed state to do09505246nistratively do
*F
*Feb  7 21:59:54.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i %LINK-5-CHANGED: Interface Dot11Radio0, changed state to rastEthernet interface
p: 192.168.9.254 peer_port: 5246 Radio(s)state to DISCOVER
eset 
*Feb  7 21:59:54.001: %CAPWAP-5-CHANGED: CAPWAP changed state tochanged state to up06.704: bsnInitRcbSlot: slot 1 has NO 
Base e
.168.9.254:52461.601: %CAPWAP-
*Feb  7 22:00:13.703: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY_ALERT: Send FATAL : Close 
*Fe
*Feb  7 21:49:21.603: %DTLS-3-BAD_RECORD: 
*Feb  7 22:00:13.703: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERYIPS selfoice_diag_test from WLC
  memory   
.9.254: Duplicate (replayed) r
*Feb  7 22:00:13.703: bsnInitRcbSlot: slot 1 has NO radio652: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert 
*Feb  7 22:00:13.766: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to aREQSU
.168.9.254:5246ng to u
  sessi
*Feb  7 21:49:39.704: %CAPWAP-5-CHANGED: CA
dministratively down DISCOVERY*Mar  1 00
*Feb  7 22:00:13.780: %PARSER-4-BADCFG: Unexpected end of configuration file.:39.704: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY.437: %LINK-3-UP

*Feb  7 22:00:13.781: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upsnInitRcbSlot: slot 1 has NO radio informati
upAP
*Mar  1 00:00:10.496: %SYS-5-R

*Mar  1 00:00:10.

*Feb  7 22:00:19.783:  status of voice_diag_test from WLC is falseface Dot11Radio0, changed state to rr a list of subcommandsto DISC
*Feb  7 22:00:30.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up*Feb  7 21:33:22.000:
p: 192.168.9.254 peer_port: 5246ection request sent p
eset

*Feb
*Feb  7 22:00:30.000: %CAPWAP-5-CHANGED: CAPWAP changed state toace FastEthern92.168.9.254 peer_port: 5246rs are res
          


*Apr 10 19:29:41.930: %CDP_PD-4-
.9.254: Duplicate 
*Feb  7 22:00:49.698: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 1929:42.352: %LINEP
*Feb  7 22:00:49.698: bsnInitRcbSlot: slot 1 has NO radioAP cha
.168.9.254:5246SCOVERYh-simula
*Feb  7 21:50:16.32
*Feb  7 22:00:49.759: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a63: %LINK-3-UPDOWN: Interface Dot11Radio0, chang
*Feb  7 21:50:16.326: %CAPWAP-5
dministratively downged state to DISCOVE
*Feb  7 22:00:49.774: %PARSER-4-BADCFG: Unexpected end of configuration file.Feb  7 21:50:16.326: bsnInitRcbSlot: slot 1 has NO radioly downCHANGED: CAPWA

*Feb  7 22:00:49.775: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upace Dot11Radio0, changed state to a55.                  : FOC14111PXNate to C  


*Feb  7 
eset:16.
*Feb  7 22:00:49.808: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up7 21:44:34.433: %CAPWAP-5-DTLSREQSUCC: DTLS connection created
wnce
*Feb  7 21:5

*Feb  7 22:00:55.776:  status of voice_diag_test from WLC is falseLER"..
 peer_ip: 192.168.9.254 peer_port: 5246ED: CAPWAP chan
p: 1
*Feb  7 22:01:06.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_io0, changed state to upPWAP changed state tolot: slot 1 has NO radioly downalize
p: 192.168.9.254 peer_port: 524621:50:22.406:  status of voice_d
*Feb  7 22:01:06.001: %CAPWAP-5-CHANGED: CAPWAP changed state toypto FIPS selfpTAL : Close

                                    
*Feb 

*Feb
.9.254: Duplicate 
*Feb  7 22:01:26.322: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192 Dot

*Feb  7 21
*Feb  7 22:01:26.322: bsnInitRcbSlot: slot 1 has NO radiod stat
.168.9.254:524693: %LINK-5-CHA
*Feb  7 21:50:51.70
*Feb  7 22:01:26.382: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a: Interface Dot11Radio0, changed state to up19:2
*Feb  7 21:50:51.706: %CAPWAP-5
dministratively downged state to DISCOVE
*Feb  7 22:01:26.397: %PARSER-4-BADCFG: Unexpected end of configuration file.Feb  7 21:50:51.706: bsnInitRcbSlot: slot 1 has NO radio9:2
*Feb  7 21:45:09.

*Feb  7 22:01:26.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upace Dot11Radio0, changed state to aAPWAP-5-CHANG
0, changed s
p: 192.168.9.254 p

*F
*
 peer_ip: 192.168.9.254 peer_port: 524621:45:28.703: %CAPWAP-5-C
*Feb  7 21:51
*Feb  7 22:01:43.430: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.9.254 %CAPWAP-5-CHANGED: C
*Feb  7 21:45
*Feb  7 21:51:38.000: DTLS_CLIENT_ERROR: ..
*Feb  7 22:01:43.430: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN_RECORD: Erroneous re
*Feb  7 21:45:28.703: bsn
etransmission count r
*Feb  7 22:01:43.594: %CAPWAP-5-CHANGED: CAPWAP changed state to CFGDSHAKE_RETRANSMIT: Max retransmit count for 192 Dot11Radio0, changed
*Feb  7 22:01:43.595: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168.-UPDOWN: 
dministrativ
*Feb  7 21:52:08.050: %DTLS-5-SEND_ALERT: Send FATAL : C
.9.254: Duplicate (replayed) recorduration file.PWAP-5-CHANGED: CAPWAP
*Feb  7 22:02:01.645: %DTLS-5-SEND_ALERT: Send FATAL : Clos    
                                                    
*Feb  7 22:02:01.784: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to rreached!nd of co
  release          
*Feb  7 21:51:38.000: %DTLS-3-HANDSHAKE_RET
esetIT: 
*Feb  7 22:02:01.811: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upng Join Request to 192.168.
.168.9.254 is reached..9.254 peer_port: 5246
*Feb  7

*Feb  7 22:02:07.780:  status of voice_diag_test from WLC is falseo 192CAPWAP changed state to JOIN9.254: Duplicate (replayed) recor

User Access Verification.254:52461
*Feb  7 21:45

Username::52:13.10
Username:-5-CHANGE
*Feb  7 22:02:18.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i

*
*Feb  7 21:45:45.598: %DT
*Feb  7 21:52:13.102: %CAPWAP-5-CHANGED: CAPWAP ch
p: 192.168.9.254 peer_port: 5246CAPWAP-5-SENDJOIN: sending Join 
*Feb  7 22:02:18.001: %CAPWAP-5-CHANGED                                      
not have an Ip !!face Dot11Radio0,
*Feb  7
*Feb  7 22:02:19.601: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168 state to 
dministratively downeb  7 21:19:3
*Feb  7 21:52:13.183: %LINK-3-UPDOW
.9.254: Duplicate (replayed) recordate to upile.NGED: CAPWAP changed s
Username: CiscoY        San Jo
Password:rn
      

AP68ef.bdc2.9810>show ?                       
  cca            CCA informationteamify
.9.254: Duplicate (repla
  cdp            CDP information %

*Feb  7 21:52:23.182: %CAPWA
  clock          Display the system clockt AP doespAA valuesWAP-5-CHANGE
Initializ
  controllers    Interface controller status3:
not have an Ip !!09.778:  status o
*Feb  
  crypto         Encryption module Not sending discovery request AP 
  dampening      Display dampening information %CAPWAP-5-DTLSREQSEND: DTLS connect
not have 
  dot11          IEEE 802.11 show information: %CAPWAP-3-ERRORLOG: Not sending discovery r
  dot1x          Dot1x information                                
 
  login          Display Secure Login Configurations and StateAP-3-ERRORLOG: Not sending discovery request AP does        IP
  memory         Memory statistics*
.168.9.254:5246439: %CAPWAP-5-
*
  radius         Shows radius information7 21:53:43.190: %CAPWAP-3-ERRORLOG: Not s
  rmi            Resource User Infrastructure informationGED: C
*Feb  7 21:46:40.339: %CAPWAP-5-CHANGED: CAPWA
not
  sessions       Information about Telnet connections:35:48.605: %DTL
*Feb  7 21:53:53.190: %CAPWAP-3-ERRO
  snmp           snmp statisticsst AP does radiosystem locationE
  ssh            Status of SSH server connections21:46:4
not have an Ip !!NGED: Interface D
*Feb  
  ssl            Show SSL commandEW: Could not discover WLC using 
  template       Template informationministratively downeb  7 21:20:08
  r
  terminal       Display terminal configuration parameters 21:54:03.193: %CAPWAP-3-ERRORLOG: Not sending discovery r
  trace          trace information     

                           
dministratively down: %CAPWAP-5-DTLSRE
W
*Feb  7 22:02:37.779: %PARSER-4-BADCFG: Unexpected end of configuration file.b  7 21:54:53.196: %CAPWAP-3-ERRORLOG: Not sending discovery request AP doesS

*Feb  7 22:02:37.780: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up have an Ip !!6.600: %DTLS-3-BA
*Feb  7 21:54:53.301: %SYS-5-RELOAD: Reload requ

*Feb  7 22:02:37.782: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to dofrom WLC is false0:06.774: %LI
eason: Could not discover WLC using DHCP IP addre
wn R
*Feb  7 22:02:37.787: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r:46:58.425: %CAPWAP
*Feb  7 21:54:53.305: %LWAPP-5-CHANGED: CAPWAP changed state
esetOWNX
*Feb  7 22:02:37.813: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up %CAPWAP
system is available.anged state to JOIN 
flashfs[0]: 12 files, 3 direct

% Type "show ?" for a list of subcommandsashfs[0]: 0 orphaned files, 0 orphaned di
AP68ef.bdc2.9810> C 



          
*Feb  7 22:02:56.225: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG################################## Unexpected end of configuration f
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(23c)JA3, RELEASE##############################################face Dot11Radio0, changed state to
 SOFTWARE (fc1)-o
*Feb  7 21:3
Technical Support: http://www.cisco.com/techsupport############################################erface 
Copyright (c) 1986-2011 by Cisco Systems, Inc.: 192.168.9.254 peer_port:
###################
Compiled Tue 18-Oct-11 15:07 by prod_rel_team %LINK-5-CHANGED: Interfa

File "flash:/c1240

ROM: Bootstrap program is C1240 boot loader3" uncompressed atry laws governing import

BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE: 0x3000te to up_RETRANSMIT: Max retransr
executing...s rt: 5246  

           
(fc2)     


This product contains cryptographic features and is subject to United01: %CAPWAP-5-C
Rights clause at FAR sec. 52.227-19 and subparagrapht
States and local country laws governing import, export, transfer andhe Rights in Technical Data and Computerd sucessfullylot: slot 1 has
use. Delivery of Cisco cryptographic products does not imply52.227-7013.p: 192.168.9.254 peer_port: 5246 Interface 

   
third-party authority to import, export, distribute or use encryption.0 West Tasman Drive192.168.9.25421:
dministratively
           San Jos
Importers, exporters, distributors and users are res47:33.431: %C




cisco AIR-LAP1242G-E-K9     (PowerPCElvis) processor (revision A0) with 27638K/5
120K bytes of memory.
Processor board ID FCZ141381XZ
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.220.0
1 FastEthernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 68:EF:BD:C2:98:10
Part Number                          : 73-11479-01
PCA Assembly Number                  : 800-30493-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC14111PXN
Top Assembly Part Number             : 800-29586-03
Top Assembly Serial Number           : FCZ141381XZ
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1242G-E-K9

Configuration register is 0xF

Open in new window

0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842707
Ok so that's a start - you have the LWAPP version of code on the AP already.

Is your WLC's management IP configured with 192.168.9.254?
0
 

Author Comment

by:mahmuod
ID: 39842747
this ip 192.168.9.254 for control
cisco
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842768
Have you set the time and date correctly on the controller?
0
 

Author Comment

by:mahmuod
ID: 39842789
yes
 sir : craigbeck
if u make factory setting for AP  can help me to add ip and configuration
cisco
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842828
As long as the AP is on the same subnet/VLAN as the controller you don't need any configuration on the AP at all.

Usually you don't put any configuration on the AP directly if it is running Lightweight code.  All of the configuration is done on the controller.  An IP and controller address is assigned to the AP via DHCP if required.

Can you post the log from the AP while it's turned on, over a 2-3 minute period?
0
 

Author Comment

by:mahmuod
ID: 39842852
but i need put ip 192,168,9.100  not need dhcp  in ap and i want change name
 i am now  rest factory setting and connect by console i need  help u sir : craigbeck
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842880
Ok at the console of the AP, try this...

clear lwapp private-config
lwapp ap ip address 192.168.9.100  255.255.255.0
lwapp ap controller ip address 192.168.9.254

Open in new window

0
 

Author Comment

by:mahmuod
ID: 39842913
Feb  7 23:21:27.692: bsnInitRcbSlot: slot 1 has NO radio
*Feb  7 23:21:27.753: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
dministratively down
*Feb  7 23:21:27.768: %PARSER-4-BADCFG: Unexpected end of configuration file.

*Feb  7 23:21:27.769:  status of voice_diag_test from WLC is false
*Feb  7 23:21:27.770: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Feb  7 23:21:27.771: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Feb  7 23:21:27.776: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Feb  7 23:21:27.802: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Feb  7 23:21:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.9.254 peer_port: 5246
*Feb  7 23:21:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb  7 23:21:39.442: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
 peer_ip: 192.168.9.254 peer_port: 5246
*Feb  7 23:21:39.443: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.9.254
*Feb  7 23:21:39.444: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb  7 23:21:39.607: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Feb  7 23:21:39.608: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168
.9.254: Duplicate (replayed) record

Open in new window




third-party authority to import, export, distribute or use encryption.ert to 192 RETURN to get started!S-5-SEND_ALERT: Send FATAL :


Transl
Importers, exporters, distributors and users are responsible for:03.702: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY  

compliance with U.S. and local country laws. By using this product you
*Feb  7 23:04:03.702: %CAPWAP-5-CHANGED: CAPWAP changed state to DISC
agree to comply with applicable laws and regulations. If you are unableAP_FIPS
*Feb  7 23:04:03.703: bsnInitRcbSlot: slot 1 has NO radio      
to comply with U.S. and local laws, return this product immediately.762: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to ab  7 

A summary of U.S. laws governing Cisco cryptographic products may be found at:istratively down                    
*Feb  7 23:04:03.777: %PARSER-4-BADCFG: U
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html5: %P

*Mar  1 00:00:08.330:  status of voice_diag_tes

92K bytes of memory.ANGED: Interface Dot
Processor board ID FCZ141381XZto r                        
 
PowerPCElvis CPU at 262Mhz, revision number 0x0950tp://
*Feb  7 23:04:03.811: %LINK-3-UPDOWN: Interf
Last reset from power-onstate to upright (c) 198
LWAPP image version 3.0.51.0                            
1 FastEthernet interface:03.816: %LINK-3-UPDOWN:

32K bytes of flash-simulated non-volatile configuration memory.  1 00:00:10.498: %SNMP-5-COLDSTART: SNMP agent on host AP
wnf.
Base ethernet MAC Address: 68:EF:BD:C2:98:10face Dot11Radio0, changed state to rrecogniz
Part Number                          : 73-11479-01                     
eset    
                   
Top Revision Number                  : A004:20.001: %CAPWAP-5-CHANGED: CAPWAP chan
Product/Model Number                 : AIR-AP1242G-E-K9..domain server (255
*Feb  7 23:04:21.467: %CAPWAP-5-DT
% Please define a domain-name first.cessfully: %

*Apr 10 19:29:41.089: 


Press RETURN to get started!ed state to DISCOVERY 
 peer


*Mar  1 00:00:05.981: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log3:04:21.468: %CAPWAP-5-SENDJOIN: sending Join Request to 1                      
 (contains, 1037 messa                     
Passw
*Apr 10 19:29:41.855: 
.9.
ASE SOFTWARE (fc1)layed) record.255.
Technical Support: http://www.cisco.com/techsupport %DTLS-5-SEND_ALERT: Send FATAL : Close notify Aler
Copyright (c) 1986-2009 by Cisco Systems, Inc.AA values                                
.168
Compiled Mon 02-Nov-09 18:40 by prod_rel_team3: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 10 19:29:20.099: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERYaccountin
*Feb  7 23:04:40.363: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 10 19:29:20.945: %LINEPROTO-5-UPDOWN: Line protoco  Display alias co          
                         
*Apr 10 19:29:48.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does11Radio0, changed state to do              
  cca                CCA informatio
not have an Ip !!ip: 192.168.
wn54
*Apr 10 19:29:58.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP doesrPWAP-5-SENDJOIN: sending Join Request to 192.168.9.254                        
not have an Ip !!                 
AP68ef.bdc2.981             
*Feb  7 22:58:22.595: %DTLS-3-BAD_RECORD: Erro
wnus
*Feb  7 23:04:46.440: %C
not have an Ip !!DHCP_IP: Could no
*Apr 10 19:30:28.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP doesecord   
*Feb  7 22
static IP. Forcing AP to use DHCP.:40.643: %DTLS-5-SEND_ALE
not have an Ip !!23:04:46.467:  st
*Apr 10 19:30:38.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does      

.168.9.254:5246.703
*Feb  7 23:04:56.000: %CAPWAP-5-DTLSREQSEND: DTLS c
not have an Ip !!sent peer_iOVERY 
*Apr 10 19:30:48.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does2.168.9.254 peer_port: 5246HANGED: CAPWAP changed state to 
*Feb  7 23:04:56.00
not have an Ip !!ED: CAPWAP change
Password:56.000: %
*Apr 10 19:31:28.886: %CAPWAP-3-ERRORLOG: Not sending discovery request AP doesNGED: Interface Dot11Radio0, changed state to r          
p: 192.168.9.254 peer
not have an Ip !!58:40.800: %LINK-
AP68ef.bdc2.9810#clear lwapp private-configRROR: ../dtls/dtls_connection_db.c:2017 Max
AP68ef.bdc2.9810#lwapp ap ip address 192.168.9.100                               
                    
Sending 5, 100-byte ICMP Echos to 192.168.9.100, timeout is 2 seconds:23:04:56.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer
!!!!!onnec
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 msow
p: 192.168.9.254 peer_port: 5246
 peer_ip: 192.168.9.254 peer_po

AP68ef.bdc2.9810#00: DTLS_CLIENT_E
*Apr 10 19:31:59.067: %CAPWAP-3-ERRORLOG: Go join a capwap controller ext to 192.168.9.254  
  exception          exception 
etransmission count
examining image...!     
*Feb  7 22:
*
extracting info (292 bytes)-HANDSHAKE_RETRANSMIT: Max 
Image info:           
    Version Suffix: k9w                     
  hosts              IP
    Image Family: C12407 23:06:01.107: %CAPWAP
    Wireless Switch Management Version: 7.0.220.0                                    
  html      
Extracting files...
*Feb  7 23:06:01.1
c1240-k9w8-mx.124-23c.JA3/ (directory) 0 (bytes)CAPWAP changed state to DISCOVERY        
 --Mo

extracting c1240-k9w8-mx.124-23c.JA3/c1240-k9w8-mx.124-23c.JA3 (4638152 bytes)!! %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY                          

!!i!!trati
*Feb  7 23:17:15.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_iend of configuration file.d configuration                             
         
p: 192.168.9.254 pee  

               
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ending discovery request AP does           Shows rad
p: 192.168.9.254 peer_port:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!31.190: %CAPWAP-3-ERRORLOG: Not sending discovery request AP doesn registry info
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ullyed reload inf
*Feb  7 23:06:41.190: %CAPWAP-3-ERRORLOG: Not sending discove
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!   
*Feb  7 22:5
not have an Ip !!5-SENDJOIN: sendi
Not in Bound state.92.168.9.
!!!!!!!!!!!!!!!!!!!!!!!:51.190: %CAPWAP-3-ERRO
extracting c1240-k9w8-mx.124-23c.JA3/7101.img (131328 bytes)!!!!-5-CHANGED: CAPWAP changed state to JOIN                 
not ha







































!!!!!!!!!602: %
. 
extracting c1240-k9w8-mx.124-23c.JA3/6701.img (131328 bytes)!!!!!!!!!!!!RLOG: Not sending discovery request AP does                  
.9.254: Du
extracting c1240-k9w8-mx.124-23c.JA3/info (292 bytes)!have an Ip !! 22:59:51.651: %D
*Feb  7 23:07:11.199: %
extracting info.ver (292 bytes)!scovery request AP does         
Deleting target version: flash:/c1240-k9w8-mx.124-23c.JA3...done.    
not have an Ip !!2:59:51.704: %CAP
*Feb  7 23:07:21.198: %CA
New software image installed in flash:/c1240-k9w8-mx.124-23c.JA3utilization                    
*Feb  7 22:59:51.704: %CAPWAP-5-
Configuring system to use new image...done.  7 23:07:31.199: %CAPWAP-3-ERRORLOG: Not s
archive download: takes 78 seconds 7 22:59:51.705: bsnInitRcbSlot: s

Writing out the event log to nvram...   
not have an Ip !!information    


flashfs[0]: 12 files, 3 directoriesORLOG: Not sending discovery reques
flashfs[0]: 0 orphaned files, 0 orphaned directoriesate to   
*Feb  7 23:00:08.000: %CA
not have an Ip !
flashfs[0]: Total bytes: 15998976ate.7: %CAPWAP-5-DTLSRE
*Feb  7 2
flashfs[0]: Bytes used: 7619072 Not sending discovery request 
flashfs[0]: Bytes available: 8379904            
 pe
*Feb  7 23:00:08.00
flashfs[0]: flashfs fsck took 31 seconds. to   
*Feb  7 23:08:31.202: %CAPWAP-3-DH
Base ethernet MAC Address: 68:ef:bd:c2:98:10P9: %CAPWAP-5-DTLSREQSUCC: DTLS connection c
Initializing ethernet port 0...     
. Renewing DHCP IP.35.429
Reset ethernet port 0... the event log to nvram.
Reset done!eer_port: 5
ethernet link up, 100 mbps, full-duplex%CAPWAP-3-ERRORLOG: Not sending discove
Ethernet port 0 initialized: link is up254                                    
Loading "flash:/c1240-k9w8-mx.124-23c.JA3/c1240-k9w8-mx.124-23c.JA3"...#########5-RELOAD: Reload requested by CAPWAP                                            
flashfs[0]: 0 orphaned files, 0 orphaned directorieste  
################################################################################6b  7 23:00:27.699: %CAPWAP-5-CHAN
flashfs[0]: Bytes used: 7624192COVERY FATAL :
################################################################################27.699: %
flashfs[0]: flashfs fsck took 32 seconds.DISCOVERYb  7 22:49:53.698: %
#############################################bd:c2:98:10eb  7 23:00:27.699: bsnInitRcbSlot

File "flash:/c1240-k9w8-mx.124-23c.JA3/c1240-k9w8-mx.124-23c.JA3-CHANGE
Reset ethernet port 0...                        
     
(c) of the Commercial Computer Software - Restrictedto up                                 

*Feb  7 22:4
Rights clause at FAR sec. 52.227-19 and subparagraph#############################################anged s
(c) (1) (ii) of the Rights in Technical Data and Computer:53.776: %LINK-
#########################################
Software clause at DFARS sec. 252.227-7013.hanged state to r                          

           cisco Systems, Inc.
#############################
           170 West Tasman Drive##################ot11Radio0, ch
           San Jose, California 95134-1706   

% Ambiguous comman
                  





Proceeding with system init             Restricted Rig

Proceeding to unmask interrupts               

Use, duplicati
Initializing flashfs... Government is7 23:00:4

flashfs[1]: 12 files, 3 directoriesnnecti
subject to restrictions as s
flashfs[1]: 0 orphaned files, 0 orphaned directoriesP68ef.bdc2.9810#    
p:
(c) of the Commercial Comput
flashfs[1]: Total bytes: 15740928*Feb  7 23:00:44.000: %CAPWAP-5-C
flashfs[1]: Bytes used: 7619072ec. 52.227-19 and subparagraph 
flashfs[1]: Bytes available: 812185               
                  
compliance with U.S. and local country laws. By using this product you3 directoriesged state to DISCOVERY             
flashfs[1]: 0 orphane
agree to comply with applicable laws and regulations. If you are unableCHANGED: CA
flashfs[1]: Total bytes: 15740928_RETRANSMIT: Max retransmi
to comply with U.S. and local laws, return this product immediately.s
flashfs[1]: Bytes available: 8116736is reached.                   

A summary of U.S. laws governing Cisco cryptographic products may be found at:dio0, c
flashfs[1]: Initialization complete....done Initializing flashfs.     
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html000: 

Radio0  present A506 7100 E8000000 A0000000 800

If you require further assistance please contact us by sending email topresent 0 0 0 0 0 2 192.168.9.254 peer_p

*Feb  7
This product contains
export@cisco.com.tures and is subj

cisco AIR-LAP1242G-E-K9     (PowerPCElvis) processor (revision A0) with 27638K  
States and local country laws governin                                    

*Feb  7 23:01:09.781:  sta
Base ethernet MAC Address: 68:EF:BD:C2:98:10and regulations. If you are unable
*Feb  7 2
Part Number                          : 73-11479-01TLSREQSEND
to comply with U.S. and local laws, ret
PCA Assembly Number                  : 800-30493-01:15.102: bsnInitRcbSlot: 
p: 192.168.9.254 pe

A su
PCA Revision Number                  : A0raphic products may be found at:ANGED: CA
PCB Serial Number                    : FOC14111PXN                  
                               
PowerPCElvis CPU at 262Mhz, revision number 0x0950FG     


Press RETURN to get started!            
Last reset from


*Mar  1 00:00:07.489: soap_prepare_new_image_crash: mini ios flash:/c1240-rcvk9w68state t
1 FastEthernet interface                        
1 802.11 Radio(s)    
8-mx/c1240-rcvk9w8-mxes of flash-simulated
*Mar  1 00:00:07.491:  set boothlpr to mini ios270: %DTLS-5-SEND_ALERT: Send FATAL : Clos     
Top Assembly Part Number       
*Mar  1 00:00:09.606: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event logbly Serial Number           : FCZ141381XZ        
*Feb  7 22:51:45.220: %CAPWAP-
 (contains, 1023 messages)mber                  : A0

*Mar  1 00:00:09.635:  status of voice_diag_test from WLC is false           : AIR-AP1242G-E-K9             
*Feb  7 22:51:55.220: %
*Mar  1 00:00:11.743: %LINK-3-UPDOWN: Interface FastEthernet0, changed state toce Dot11Rad


Press RETURN to get started!             
not have an Ip


Transl
upng
*Mar  1 00:00:11.775: %SYS-5-RESTART: System r                                             
0, changed state to downpeer_p
Technical Support

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)sending Join
Copyright (c) 1986-2011 by Cisco Systems, Inc.            

*Apr 10 19:29:38.084: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERYteamANGED: CAPWAP changed state to JOINW: Could n
*Mar  1 00:00:10.499: %S
*Apr 10 19:29:38.084: bsnInitRcbSlot: slot 1 has NO radioCAPWAP-5-CHANGED: CAPWAP changed state to CFG.           
*Apr 10 19:29:38.312: %SSH-5-ENABLED: SSH 2.0 has been enabled7 2
*Apr 10 19:29:20.092: %LINK-5-CHANGED: Interface Dot11Radi
*Apr 10 19:29:38.995: %PARSER-4-BADCFG: Unexpected end of configuration file.*Feb  7 22:53:
.9.254: D
esetate 
*Apr 10 19:29:20.929: %LINEPROTO-5-UPDOWN: 

*Apr 10 19:29:38.995:  status of voice_diag_test from WLC is fClos             
not have an Ip !!                 

       
Username:*Apr 10 1
*Feb  7 23:20:39.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_iot11Radio0, changed state to a                            
*Apr 10 19:29:41.090:
p: 192.168.9.254 peer_port: 5246diostratively down  7 22:53:45.2
*Feb  7 23:20:39.001: %CAPWAP-5-CHANGED: CAPWAP changed state to: SSH 2.0 has been enabled                                      
*Feb  7 23:20:40.430: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfullyf configuration file. state to up             

*Feb  7 22:53:55.234: %CAPWAP-3-
 peer_ip: 192.168.9.254 peer_port: 5246:  status of voice                     
.9.254: Duplicate (replayed) record]:
*Apr 10 19:29:43.092: %SYS-6-LOG
Username:TARTSTOP:
*Feb  7 23:20:58.663: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192                           

255 started - CLI initiated19
eset    
*Feb  7 23:0
.168.9.254:52469:43.407: %LINE
*Feb  7 23:20:58.718: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERsck took 32 seconds.                       

              
            
*Feb  7 23:21:05.077: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power sending Join Request to 192.168.9.254########
*Feb  7 23:02:33.433: %CAPWAP-5-SEN
ource send
*Feb  7 23:21:05.112: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upstate to JOIN##################
*Feb  7 23:02:33.433: %CAPWAP-5-CHANGED: CAPWAP 

*Feb  7 23:21:06.078: %LINEPROTO-5-UPDOWN: L                                          
*Feb  7 23:21:08.001: %CAPWAP-5-CHANGED: CAPWAP changed state to############################### 
*Feb  7 23:02:51.649: %
.168.9.
*Feb  7 23:21:09.425: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfullytate to DISCOVERY                               
.168.9.254:5246               

 peer_ip: 192.168.9.254 peer_port: 5246P-5-CHANGED: CAPWAP changed state to DI
*Feb  7 23:21:09.427: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.9.254:
*Feb  7 23:13:25.709: bsnInitRcbSlot: slot 1 has NO radioOVERY Government is 
*Feb  7 23:21:09.427: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINANGED: Interface Dot11Radio0, changed state to a                     
*Feb  7 23:21:09.589: %CAPWAP-5-CHANGED: CA               
dministrative            



























AP68ef.bdc2.9810 con0 is now availablef the Rights in Technical Data and 

*





Press RETURN to get started.N: Interface Dot11Radio0, ch










*Feb  7 23:21:09.590: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168      

*Feb  7 23:13:25.789: %LINK-5-CHANGED: Interface Dot11Radio0, changed st
.9.254: Duplicate (replayed) recordd state to r       San Jose, Califo

User Access Verification
*Feb  7 23:13:25.816: %

Username: Ciscnterface Dot11
*Feb  7 23:21:19.191: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power s                          
Xmodem file system is available. 
 SOFT

*Feb  7 23:0
ourceo8:  
f
Password: 11 files

AP68ef.bdc2.9810>lsechsupport     
*Feb  7 23:21:27.638: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192P-5-DTLSREQSEND: DTLS connection reque
flashfs[0]: Total bytes: 1599897618-Oct-1
.168.9.254:5246rel_team 
flash

wn##
*Feb  7 23:21:27.776: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r state to DISCOVERYrty authority to import, export, di

File "flash:/c1240-rcvk9
eset/c12
*Feb  7 23:21:27.802: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to uprs, distributors and users are responsible for
y point: 0x3000          
*Feb
ex

*Feb  7 23:21:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ing this product yo

Use, duplication, or disclosure by the Government isce Dot11
p: 192.168.9.254 peer_port: 5246plicable la
subject to restricti
*Feb  7 23:21:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to                 
*
*Feb  7 23:21:57.709: bsnInitRcbSlot: slot 1 has NO radio
*Feb  7 23:21:57.769: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
dministratively down
*Feb  7 23:21:57.784: %PARSER-4-BADCFG: Unexpected end of configuration file.

*Feb  7 23:21:57.786:  status of voice_diag_test from WLC is false
*Feb  7 23:21:57.786: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Feb  7 23:21:57.788: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Feb  7 23:21:57.793: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Feb  7 23:21:57.819: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Feb  7 23:22:08.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.9.254 peer_port: 5246
*Feb  7 23:22:08.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb  7 23:22:09.423: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
 peer_ip: 192.168.9.254 peer_port: 5246
*Feb  7 23:22:09.424: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.9.254
*Feb  7 23:22:09.424: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb  7 23:22:10.211: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Feb  7 23:22:10.213: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168
.9.254: Duplicate (replayed) record

Open in new window

0
6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

 
LVL 45

Expert Comment

by:Craig Beck
ID: 39842926
Can you check the country code on the controller?

Wireless -> Country

Post a screenshot.
0
 

Author Comment

by:mahmuod
ID: 39842970
United States
0
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 39842995
Ok you need to change that to a country which is designated by the -E regulatory code, as noted here...

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.html#wp9003658
0
 

Author Comment

by:mahmuod
ID: 39843050
ok working thank s
but how to change name AP Name
i want command
chang this to AP68ef.bdc2.9810>  ---->eskander>
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843071
Make ALL changes from this point onwards in the controller only.

Go to...

Wireless -> Click on AP

In there, change the AP name and click Apply.
0
 

Author Comment

by:mahmuod
ID: 39843083
but when ping ip 192.168.9.100 in my computer

C:\Users\mms>ping 192.168.9.100

Pinging 192.168.9.100 with 32 bytes of data:
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.

Ping statistics for 192.168.9.100:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843090
Can you see the AP on the controller?
0
 

Author Comment

by:mahmuod
ID: 39843098
ok see but i want ping in the network computer to test not need log in to controle
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843115
Ok you need to get on the same page as me.  I know you want to check the AP from the computer but I'm asking if you can see the AP on the controller.

This is important as if you can't it may mean that the AP is off/restarting/etc...

So, can you STILL see the AP from the controller?
0
 

Author Comment

by:mahmuod
ID: 39843169
ok Joined in control
but iconnect wireless  to computer connected by wireless
but ip not ping in seam networkl
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843210
Can you show the WLAN configuration?
Have you configured the WLAN interface as 'management'?
Do you have DHCP giving IP addresses to wireless clients?
0
 

Author Comment

by:mahmuod
ID: 39843298
ok Joined in control
cisco
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843319
Ok so you can see the AP at the WLC but you can't ping it from the WLC.

Can you show the config for the management interface?
0
 

Author Comment

by:mahmuod
ID: 39843345
from hyperterminal ok ping  192.168.9.100 and 192.168.9.254 is ok

!!!!!
Success rate is 5 percent (5/5)

put in the network no ping
C:\Users\mms>ping 192.168.9.100

Pinging 192.168.9.100 with 32 bytes of data:
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.
Reply from 192.168.9.3: Destination host unreachable.

Ping statistics for 192.168.9.100:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\mms>ping 192.168.9.254

Pinging 192.168.9.254 with 32 bytes of data:
Reply from 192.168.9.254: bytes=32 time<1ms TTL=128
Reply from 192.168.9.254: bytes=32 time<1ms TTL=128
Reply from 192.168.9.254: bytes=32 time<1ms TTL=128
Reply from 192.168.9.254: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.9.254:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 39843387
OK that's fine. If you enable management via wireless you should be able to ping the AP from a client but really that's not desirable.

That will pose a security risk which isn't really worth causing purely for the sake of wanting to ping the AP.
0
 

Author Comment

by:mahmuod
ID: 39843393
thank u  thank u  thank u
i will try
0

Featured Post

What Is Threat Intelligence?

Threat intelligence is often discussed, but rarely understood. Starting with a precise definition, along with clear business goals, is essential.

Join & Write a Comment

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now