Sonicwall NSA 240 / Fiber ISP

Replacing our internet service to 20Mbps Fiber link

Currently been running Load Balance on a DSL circuit and Cable circuit

but I am not getting the Upload speed I would expect ...

I have connected directly to the fiber switch and get 20/20

but on the NSA240 I get 20/5

I have turned off Security Services,
forced the link to 1000 Full ,
Checked  "Fragment non-VPN outbound packets larger than this Interface's MTU"
 Security Services are "Performance optimized"

Still no luck

NSA240 should be able to handle throughput of this link correct ?
bradwcampbellAsked:
Who is Participating?
 
InfamusConnect With a Mentor Commented:
I know you tried a few things from this article but try the rest of the recomendation from this article.

http://www.firewalls.com/blog/sonicwall-throughput/
0
 
bradwcampbellAuthor Commented:
10-4 Thank You,

I had all that complete except for the name resolution , but still no luck
0
 
InfamusCommented:
Have you also disable Anti-Virus and web filtering just to test?
0
 
bradwcampbellAuthor Commented:
10-4  I had just about everything turned off ..

I worked on this most of the night ... I woke up this morning and  noticed that the speed is now 20/20

I don't know what happened while i slept .. but appears to be working now

Thanks for suggestions !
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.