Solved

cisco voice question

Posted on 2014-02-08
3
255 Views
Last Modified: 2014-02-09
i want to know  how to route outbound calls from a cisco router using the fxo/fxs cards using a 2811 router while connectting my landline rj11 to the fxo port voice card.

basically this is a lab i have been always trying to figure out in setting up voice.
0
Comment
Question by:mmetaphor
  • 2
3 Comments
 
LVL 20

Expert Comment

by:José Méndez
Comment Utility
So your landline is your connection to the telephony company, and you wish to route calls through it? Are these calls going to be generated from IP Phones plugged to the 2811? Or maybe from FXS ports connected to analog phones?

Basically you would use dial-peers to route calls, that would be the straightest answer to your question:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
0
 

Author Comment

by:mmetaphor
Comment Utility
are there any configuration example, on how to configure dial peers on the fxo port on a router. any step by step approach thanks.
0
 
LVL 20

Accepted Solution

by:
José Méndez earned 500 total points
Comment Utility
0

Featured Post

Do You Know the 4 Main Threat Actor Types?

Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

Join & Write a Comment

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
What do we know about Legacy Video Conferencing? - Full IT support needed! - Complicated systems at outrageous prices! - Intense training required! Highfive believes we need to embrace a new alternative.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now