Solved

Trying to access Intranet site from behind Sonicwall

Posted on 2014-02-09
5
345 Views
Last Modified: 2014-02-27
Have a network configuration that I'm going to redesign, but have the immediate need to access an internal WEB site from behind one of the two Sonicwalls.  Have attached the current design.

Need to have access from VLAN20 (10.10.20.0) to the Intranet Server on the WAN side of the Sonicwall 3060.  Given that all Internet traffic is routed from the Cisco Layer 3 through the Sonicwall to the 44.0 network first,  I would think I could access anything on that side.

Hope this makes sense, want to eliminate the Sonicwall 3060 and connect the 44.0 network to the Layer 3 and connect the Layer 3 to the Sonicwall 3600.  Need some down time to do the reconfig and testing.  So hopefully for now there is a work around!
Network-Config.png
0
Comment
Question by:Webcc
  • 4
5 Comments
 
LVL 26

Expert Comment

by:Soulja
ID: 39847414
Can you provide the routing info for your SonicWall 3060 and your L3 switch? Also, the what routes are on the intranet server?
0
 

Author Comment

by:Webcc
ID: 39848215
Here are the configs.  Had to take screen shots of Sonicwall could not export.  Let me know if you need anything else.  Thx
Sonicwall3060.rtf
Cisco-SG300-L3.rtf
0
 

Author Comment

by:Webcc
ID: 39853217
Any thoughts?  There are currently no routes on the intranet server.
0
 

Accepted Solution

by:
Webcc earned 0 total points
ID: 39879426
Reconfigured Sonicwall Access Lists and everything is working.
0
 

Author Closing Comment

by:Webcc
ID: 39891391
No response from any experts out there and I worked through the problem myself.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now