Solved

Adding new UCS blades - LAN

Posted on 2014-02-10
3
386 Views
Last Modified: 2014-02-21
Hello Experts,

We have 4 Cisco UCS B series chassis, each of which contains 2 blades, which have been set up for a year.

We need to add the rest of the blades, but the VLANs are not appearing for the new blades.  All the vlans are configured on the 2 machines already in use.

We used Service Profiles, so I thought that all the settings should have already been there.

Any help is appreciated.

Thanks,

Scott.....
0
Comment
Question by:svillardi
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 13

Expert Comment

by:Abhilash
ID: 39847362
Don't you see the VLAN's when you try to add it to the NIC in the service profile?
Did the chassis discover go well?
0
 

Accepted Solution

by:
svillardi earned 0 total points
ID: 39863786
I found the problem with Cisco TAC.  They noticed that the vNICs weren't automatically updating.  So we deleted them from each blade and reconfigured them.  Don't know why they aren't part of the profile.

Thanks anyway,

S.....
0
 

Author Closing Comment

by:svillardi
ID: 39876312
Help was provided by Cisco TAC.
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I will show you HOW TO: Perform a Physical to Virtual (P2V) Conversion the easy way from a computer backup (image).
Ransomware is a malware that is again in the list of security  concerns. Not only for companies, but also for Government security and  even at personal use. IT departments should be aware and have the right  knowledge to how to fight it.
Teach the user how to install ESXi 5.5 and configure the management network System Requirements: ESXi Installation:  Management Network Configuration: Management Network Testing:
Teach the user how to install log collectors and how to configure ESXi 5.5 for remote logging Open console session and mount vCenter Server installer: Install vSphere Core Dump Collector: Install vSphere Syslog Collector: Open vSphere Client: Config…

761 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question