Cacti does not seem to show values over "80 M" when "bits per second" with total traffic is used. It seems when the traffic goes over "80 M", the graph for that period is empty/no value. Please see see attached screenshot.
If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
David Varnum recently wrote up his impressions of PRTG, based on a presentation by my colleague Christian at Tech Field Day at VMworld in Barcelona.
Thanks David, for your detailed and honest evaluation!
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg).
If you're interested in additional methods for monitoring bandwidt…