Solved

Sonicwall GVC - Ping clients?

Posted on 2014-02-11
2
359 Views
Last Modified: 2014-02-20
OK, not too sure what  I have wrong here.  I just want to be able to ping endpoints on my Sonicwall GVC (Global VPN Client).

Connectivity between the VPN subnet and my LAN subnets is fine.  Just can't ping.  I do get ping replies when pinging from the VPN device into my LAN.

For testing, I created two firewall rules:
From LAN to VPN Allow Any Any...
From VPN to LAN Allow Any Any...

Still no ping.  Running the ping directly on my Sonciwall Firewall, still no reply.
0
Comment
Question by:JamesonJendreas
2 Comments
 
LVL 38

Accepted Solution

by:
Aaron Tomosky earned 500 total points
ID: 39852410
Does the Device on the VPN have a software firewall blocking?
0
 
LVL 1

Author Closing Comment

by:JamesonJendreas
ID: 39875074
Awarding points, although it probably wasn't a local firewall.  Not too sure what it was, but pings are now passing
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Available cert SBS2008 for L2TP /IPSec 4 48
Sonicwall TZ 205- Dropping Incoming E-mail as IP Spoof 13 171
Connecting to CISCO 4402 WLC 3 32
Failover VPN Question Sonicwall 5 33
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question