Solved

Cannot connect to RDP

Posted on 2014-02-11
1
359 Views
Last Modified: 2014-02-11
Ok this one is weird. I setup a new terminal server on Server 2008. We have 3 total, all VM's under hyperV. The other 2 are working fine, however this one is behaving very odd. From my station I can connect to it using the /admin and also a second regular RDP using a normal domain user. In TS manager I see both connections all seems well. Can also ping just fine.

Now when I go to a different workstation, I cannot connect to the server at all. Nor can I ping it. My gut instinct is a firewall issue, so the first thing I did was go into advanced firewall, and disable all 3 profiles (domain, private,public). Still can't ping or connect, but I can just fine from mine. No AV/Firewall software on the server or clients that I'm testing from.

The VM's are  using the same network team, and the same network settings (less different IP of course).

Anythoughts?
0
Comment
Question by:bhieb
1 Comment
 

Accepted Solution

by:
bhieb earned 0 total points
ID: 39851067
DOH, was the subnet mask. We recently when to a 255.255.254.0 and I set  this to 255.255.255.0 by habit. My PC is static in the first subnet, the others are not, thus the failed communication.
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

To effectively work with Diskpart on a Server Core, it is necessary to write some small batch script's, because you can't execute diskpart in a remote powershell session. To get startet, place the Diskpart batch script's into a share on your loca…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now