Solved

Catalyst switches qos and avaya voip phones

Posted on 2014-02-12
1
1,922 Views
Last Modified: 2014-02-28
I am totally new to VoIP. But I have several Avaya phones that will be connecting to the 2960 switch and 3750x. They are both layer 2 switches. my core is a layer 3 3750x.

After doing some research on QoS configuration on the Catalyst switches. I am not sure where to go from here.

So my plan is to configure data vlan10 and voice vlan20 for my switch port. As the Avaya phones marked its traffic to cos5 or dscp 46 (I am not sure which one), I will configure mls qos trust dscp on my switch port. But then after that, I see some people use "auto qos voip trust". Some do "auto qos voip cisco-phone". Do I need to use that command on my switch ports where the phones are connected to? What if I don't, will qos still work? What if I just use "auto qos voip"

What's the difference between autoqos with and w/out cisco-phone?

I also have the PCs connected to the phones.

Thank you in advance for your inputs
0
Comment
Question by:leblanc
1 Comment
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 39855586
Here you go pitachip... this is a great link which should answer your question :-)

https://supportforums.cisco.com/thread/2037725
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Hey there Heard about jingle, the add on for XMPP that enables point to point audio between two XMPP clients. No server config necessary. Actually quite a cool feature. However, how good is it if you can not use those voice capabilities to do a P…
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now