Solved

Why does Group Policy Fail to Update?

Posted on 2014-02-13
2
613 Views
Last Modified: 2014-02-14
We are having an odd problem at our business.  Group policy fails to update with Event IDs 5719, 1129, and 1055 to all of our computers.  However, if we put a cheap router or switch inline between the computer and our network there are no problems.  All computers are running Windows 7 and we have a Cisco switch infrastructure.  

Additionally, we have tried the hotfix Microsoft suggests per KB article 2459530 with no luck.

Thanks in advance for any help.
0
Comment
Question by:MSS_IT
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 42

Accepted Solution

by:
kevinhsieh earned 500 total points
ID: 39858306
What is the configuration on your Cisco switch ports. You should be running spanning-tree portfast for all ports connected to your endpoints. Without it the ports take about 45 seconds to start passing traffic, and your PCs probably boot faster than that.
0
 

Author Comment

by:MSS_IT
ID: 39859560
We switched a couple of the switches over to portfast last night for testing and that did resolve the issue.  But while researching it online we were finding conflicting reports on this being the best practice setup.  We did also enable BPDU guard on the switches.
0

Featured Post

PeopleSoft Has Never Been Easier

PeopleSoft Adoption Made Smooth & Simple!

On-The-Job Training Is made Intuitive & Easy With WalkMe's On-Screen Guidance Tool.  Claim Your Free WalkMe Account Now

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Invest in your employees with these five simple steps to improve employee engagement and retention.
Resolving an irritating Remote Desktop connection that stops your saved credentials from being used.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question