Solved

HP Procurve Policy Based Routing

Posted on 2014-02-13
8
2,858 Views
Last Modified: 2014-02-19
Hi

I cant make head not tail of this for a 5406zl (yes the firmware supports PBR its greater than  K.15.06.0006:)
I've read the pdf and it reads like a foreign language!
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03015541/c03015541.pdf 

Basically I want all the traffic that comes from 192.168.5.0/24 to be routed to 192.168.5.1
(at present its getting routed to the default route on the chassis - which is the wrong interface on the firewall.

If you have a working example I would be very grateful - Id also like to be able to ping which seems to complicate matters further!

Pete
0
Comment
Question by:Pete Long
  • 4
  • 4
8 Comments
 
LVL 12

Expert Comment

by:Infamus
ID: 39856966
I don't PBR is supported.

Please refer to following EE thread.

http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_25283370.html
0
 
LVL 57

Author Comment

by:Pete Long
ID: 39857179
Hi

As per the last link on that thread it is now supported on the 5406zl :)
0
 
LVL 12

Expert Comment

by:Infamus
ID: 39857242
Ahhh, i missed that one. sorry.

Let me see what I can find out.
0
Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

 
LVL 12

Expert Comment

by:Infamus
ID: 39857258
Quick question,

Why can't you set the devices on 192.168.5.0/24 default gateway to be 192.168.5.1
0
 
LVL 12

Expert Comment

by:Infamus
ID: 39857509
Here is the topic similar to your needs.

http://h30499.www3.hp.com/t5/LAN-Routing/Policy-based-routing-5406/td-p/5503505#.Uv09VPldVF0

Well, actually the link that you mentioned have the same instruction.
0
 
LVL 57

Author Comment

by:Pete Long
ID: 39857633
>>Why can't you set the devices on 192.168.5.0/24 default gateway to be 192.168.5.1

Because its traffic getting natted out of the WAN port of an MSM controller :(
0
 
LVL 57

Accepted Solution

by:
Pete Long earned 0 total points
ID: 39860053
OK - PBR is suported, ONLY if all the bladed in the swich were V2 Blades (mine were not)

heres how to do it

class ipv4 ClassWirelessPBR
match ip 192.168.5.0/24 any
exit
policy pbr PolicyWirelessPBR
class ipv4 ClassWirelessPBR
action ip next-hop 192.168.5.1
action interface null
exit
vlan 900 service-policy Policy_WirelessPBR in
exit

Open in new window

0
 
LVL 57

Author Closing Comment

by:Pete Long
ID: 39869819
Only links supplied, I had already linked to.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Building small business network 4 72
Hybrid WAN vs SD WAN 4 51
Internet Service Provider 3 50
Home lab datacenter 9 53
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question