Solved

Cisco AP1142N-A-K9 wireless configuration question

Posted on 2014-02-13
4
587 Views
Last Modified: 2014-02-13
Hi all, I am looking for some advice/help on setting up an Cisco 1142N Access point.

Is it possible to setup that AP for a private wireless and a guess wireless?

Private would have access to the internet and local network, guest only access to the internet.

Looking over the specs, it's not clear to me if its possible, though I'm not a Cisco expert, would appreciate any input or advice.
0
Comment
Question by:ChiIT
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 12

Expert Comment

by:Infamus
ID: 39857350
It is possible to have multiple ssid's but you need vlan tagging to seperate the network.

There should be an option to use vlan ID under SSID section and that is the vlan number on the switch.

The AP must be connected to a switch with trunk mode.
0
 
LVL 2

Author Comment

by:ChiIT
ID: 39857384
Thanks for the quick response. I'll login and check the ssid section for vlan ID, unsure of if the switch has trunk mode, will need to check on that.
0
 
LVL 12

Accepted Solution

by:
Infamus earned 500 total points
ID: 39857410
0
 
LVL 2

Author Closing Comment

by:ChiIT
ID: 39857424
Perfect, thanks Infamus!
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco vWLC DHCP issues 36 96
Stuck in INIT/DROTHER 2 75
Ruckus Zoneflex 7982 multiple SSIDs disconnects 11 83
Amazon Echo Dot 2 setup problem 5 71
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

740 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question