Solved

HP Procurve HP2510G-24 no username prompt

Posted on 2014-02-18
2
1,331 Views
Last Modified: 2014-02-18
Hi,

We have a ProCurve switch that only prompts for password but no username, when connected via console. How do I bring the username prompt?

I have set different passwords for manager and operator, and each password gets me in the appropriate mode without having to type in a username, but all our other switches prompt for both, so not sure why this is  different? Do I need to set up optional usernames first?

Thanks!
0
Comment
Question by:rookie_b
2 Comments
 
LVL 25

Accepted Solution

by:
Zephyr ICT earned 500 total points
ID: 39867046
I thought it was something like this, though it's been  a while I had to deal with HP switches:

# password manager user-name admin

Open in new window


Other than that you can set the user name through the webconsole of the switch no?

Security => Device Passwords

[edit]
Just had a browse through the manual:
Note that the Command Prompt and switch console interfaces use only the
password, and do not prompt you for the User Name.
0
 

Author Closing Comment

by:rookie_b
ID: 39867069
Must be this model then. Thanks!
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question