Solved

Ask about KeepAlive on CentOS 6.4!

Posted on 2014-02-18
4
414 Views
Last Modified: 2014-03-03
Hi All,

I am using KeepAlive on CentOS 6.4, 02 servers running FailOver, information of Servers below:

1. Server-1: 172.16.1.2 (VIP: 172.16.1.5)
2. Server-2: 172.16.1.3 (VIP: 172.16.1.5)

Issue-1:
When I down the ETH0 on Server-1 (Shell>ifconfig eth0 down), after a long time, the Server-2 couldn't get the IP 172.16.1.5 (it isn't work) & after I UP ETH0 and MUST START KeepAlive on the Server-1, it works OK with IP 172.16.1.5

The LOG: "receive an invalid ip number count associated with VRID!"

Issue-2:
When Power-Off the Server-1 and around 5s the Server-2 get the IP 172.16.1.5, then it works OK and when I Power-On the Server-1 again, the Server-1 get the IP 172.16.1.5 from Server-2.

My question:
What's happened? Please give me your solution.

Thanks in advances.

LDVHAI.
0
Comment
Question by:ldvhai
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 
LVL 13

Accepted Solution

by:
Sandy earned 500 total points
ID: 39867001
Check the priority defined for the VIP among nodes. So to me it seems like your system1 is having higher precedence and also check the voting structure of resources.

TY/SA
0
 
LVL 2

Author Comment

by:ldvhai
ID: 39867226
OK, Thanks Sandy, I will check it.
0
 
LVL 2

Author Comment

by:ldvhai
ID: 39869059
HI Sandy,

I found problems of KeepAlived that I asked above:
The Group ID on the System-1 is the same with System-2 and I changed Group ID of System-1 & System-2. It works OK.

- System-1: Server-1 & Server-2
- System-2: Server-1 & Server-2 (due to I copied the configure files from System-1 & applied them to System-2, only changed the IP and didn't change Group ID between System-1 & System-2).

Thanks for your answer.
0
 
LVL 2

Author Closing Comment

by:ldvhai
ID: 39900541
Thanks for your anwser.
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Setting up Secure Ubuntu server on VMware 1.      Insert the Ubuntu Server distribution CD or attach the ISO of the CD which is in the “Datastore”. Note that it is important to install the x64 edition on servers, not the X86 editions. 2.      Power on th…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
How to Install VMware Tools in Red Hat Enterprise Linux 6.4 (RHEL 6.4) Step-by-Step Tutorial
Suggested Courses

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question