Solved

License Concerns on Cisco 881w

Posted on 2014-02-19
2
676 Views
Last Modified: 2014-02-19
Trying to replace a Cisco 851 router with a Cisco 881w. In the 881w there is a line in the running config that says "license udi pid C881W-A-K9 sn FTX17288698". This line is not in the Cisco 851. Also, I did show license on the 881w and saw the output below. The router will be in the main office and will be tunneling with branch routers. Should I be concerned about the SSL-VPN license status?



Password:
palatine#sho license
Index 1 Feature: advipservices
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 2 Feature: advsecurity
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 3 Feature: ios-ips-update
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 4 Feature: SSL_VPN
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: 0/0  (In-use/Violation)
        License Priority: None
Index 5 Feature: WAAS_Express
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
0
Comment
Question by:bobox00
2 Comments
 
LVL 12

Accepted Solution

by:
Infamus earned 500 total points
ID: 39871088
SSL license is for client SSL VPN and IPSec VPN tunnel doesn't need additional license.

Can you also post sh license from old router so that we can compare?
0
 

Author Closing Comment

by:bobox00
ID: 39871360
Looks like I'm good. Thanks!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question