Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Route specified web traffic through vpn in sonicwall

Posted on 2014-02-19
6
472 Views
Last Modified: 2014-02-27
I have one branch connected to head office throguh site to site VPN. I'm using Sonicwall TZ205 in branch and Sonicwall NSA in headoffice. One of our bank site only accept connection from white listed public IP. So i need to route traffic from branches to that bank site through the public ip of my head office. Whats is the best practice ?
0
Comment
Question by:vijaydawda
  • 4
  • 2
6 Comments
 
LVL 20

Expert Comment

by:carlmd
ID: 39872930
How are the branches connected to the head office? Do they come in on the LAN side of the Sonicwall (private network?) or through the Sonicwall via the WAN? If through the WAN are they using a VPN?
0
 
LVL 1

Author Comment

by:vijaydawda
ID: 39873227
Hi carlmd,
I have mentioned in question that we are using vpn (site to site) to connect branches to head office.
0
 
LVL 20

Expert Comment

by:carlmd
ID: 39874061
Take a look at this method, which should work for you.


https://www.fuzeqna.com/sonicwallkb/ext/kbdetail.aspx?kbid=8086
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 1

Accepted Solution

by:
vijaydawda earned 0 total points
ID: 39879212
I did  the following and working fine

1. Your Side (Which have public IP)

Edit the VPN connection

Add the IP of external web server in the local network (Subnet should be 255.255.255.255 (/32) )



2. Vendor Side

Edit the VPN connection

Add the IP of external web server in the remote network (Subnet should be 255.255.255.255 (/32)

Don't forget to add a VPN to WAN rule with NAT enabled.
0
 
LVL 1

Author Comment

by:vijaydawda
ID: 39879215
Edit VPN parameters :

Do the following

1. Your Side (Which have public IP)

Edit the VPN connection

Add the IP of external web server in the local network (Subnet should be 255.255.255.255 (/32) )



2. Vendor Side

Edit the VPN connection

Add the IP of external web server in the remote network (Subnet should be 255.255.255.255 (/32)

Don't forget to add a VPN to WAN rule with NAT enabled.
0
 
LVL 1

Author Closing Comment

by:vijaydawda
ID: 39891400
Its works
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you connect to your workplace's VPN, you may not notice that you are using your workplace's servers to serve up webpages.  This might be undesirable since the workplace can log all the places you've been.  It also might be very slow to load pag…
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question