Solved

HW Raid 5 configuration - Server 2008R2

Posted on 2014-02-21
2
265 Views
Last Modified: 2016-12-08
Hi folks,
i need advice from you. Dell PE 2900, 5x 750Gb drives ... I am configured in Dell RAID manager one big virtual disk in layout RAID 5. Installed Windows 2008 R2 with boot partition 80Gb. After successful install Windows 2008 I see in Disk manager boot partition 80 Gb and two unallocated spaces, one in size 1969 Gb and two in size 1676 Gb. I can format only first part 1969Gb but I would like configure one 3.5 Tb drive. It is possible and if yes, could you please advice how?
Many thanks
0
Comment
Question by:filip75
2 Comments
 
LVL 20

Accepted Solution

by:
CompProbSolv earned 500 total points
ID: 39877659
To get past 2T drive size you will have to configure the drive as GPT.  This link may be helpful:
http://support.microsoft.com/kb/2581408.

As long as your boot partition is under 2T (which it is in your case), this should work well.
0
 

Author Closing Comment

by:filip75
ID: 39877702
Thanks a lot!
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.
This video explains how to create simple products associated to Magento configurable product and offers fast way of their generation with Store Manager for Magento tool.

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now