Solved

wsus and windows 2012 server

Posted on 2014-02-25
10
338 Views
Last Modified: 2016-02-20
I have a wsus server and makes updates for my virtual windows servers.

I have a one server ,shows me update is ready and choose install ,if i click install now ,this meassage dissepeart and install no updates .

How i will install ready updates for my virtual server (all are windows 2012) ?

Thanks
0
Comment
Question by:apollo-13
  • 5
  • 5
10 Comments
 
LVL 35

Assisted Solution

by:Mahesh
Mahesh earned 500 total points
ID: 39885041
If you run rsop.msc on virtual server are you able to view WSUS GPO settings ?

Path is computer configuration\administrative templates\windows components\windows updates

I think GPO is not applied and updates are downloaded from internet directly.

Also once you select install now it will install in background (Stealth mode) and when you restart computer by EOD you will notice that updates are being installed

After reboot you can check add remove programs for installed updates

Mahesh
0
 

Author Comment

by:apollo-13
ID: 39885062
If you run rsop.msc on virtual server are you able to view WSUS GPO settings ?

--- mmc screen comes out  --administrator WFDP-RsoP

After reboot you can check add remove programs for installed updates

---i will check it
0
 

Author Comment

by:apollo-13
ID: 39885074
Path is computer configuration\administrative templates\windows components\windows updates
--  automatically update        active (ask user)
0
 
LVL 35

Assisted Solution

by:Mahesh
Mahesh earned 500 total points
ID: 39885129
are you able to view WSUS server configured at above path and any other settings

If you could place screen shot here
0
 

Author Comment

by:apollo-13
ID: 39885146
yes i am able to see:

- automatically update configuration                      active    WSUS(ask user)
- internal path microsoft update services               active    WSUS(ask user)
   http:\\wsusserver.domain.local:8530
- no automatically restart                                           active   WSUS(ask user)
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 35

Assisted Solution

by:Mahesh
Mahesh earned 500 total points
ID: 39885179
Then update should get installed in background
0
 

Author Comment

by:apollo-13
ID: 39885367
ok i will check it. windows 2012 doesnt show updates during installation anymore?
0
 
LVL 35

Assisted Solution

by:Mahesh
Mahesh earned 500 total points
ID: 39885375
As far as i know, WSUS always install updates in quiet \ supress mode only
0
 

Author Comment

by:apollo-13
ID: 39900043
i click install but every time after server restart comes out again .
0
 
LVL 35

Accepted Solution

by:
Mahesh earned 500 total points
ID: 39900050
After completing update installation, you should be get prompted for reboot by system

You have to wait until the pop up message

Can you please show me windows update GPO configuration screen shot here please to get better clarity
0

Featured Post

Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

My GPO's made for 2008 R2 servers were not allowing me to RDP into a new 2012 server by default.  That’s why I tried to allow RDP via Powershell, because I could log into a remote shell without further configuration. Below I will describe how I wen…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
In this Micro Tutorial viewers will learn how to use Boot Corrector from Paragon Rescue Kit Free to identify and fix the boot problems of Windows 7/8/2012R2 etc. As an example is used Windows 2012R2 which lost its active partition flag (often happen…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now