Solved

AD DNS Crashed and recreated but DC not working

Posted on 2014-02-26
5
212 Views
Last Modified: 2014-05-31
My DNS and AD running in the same machine windows 2008 R2. But my DNS corrupted so I removed and add the DNS again but I am getting the below error when I join any PC to the domain.


Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.

The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "xxx.local":

The error was: "DNS name does not exist."

(error code 0x0000232B RCODE_NAME_ERROR)

The query was for the SRV record for _ldap._tcp.dc._msdcs.xxx.local

Common causes of this error include the following:

- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:


12.47.92.60
12.77.92.45
172.68.1.2

- One or more of the following zones do not include delegation to its child zone:

xxx.local
local
. (the root zone)
0
Comment
Question by:jobby1
  • 3
5 Comments
 
LVL 57

Expert Comment

by:Mike Kline
ID: 39888492
Restart the netlogon service on that DC to see if it registers the SRV records again.    When you say AD crashed can you tell us a bit more about that.  

What errors are you seeing in your logs?

Thanks

Mike
0
 
LVL 80

Expert Comment

by:David Johnson, CD, MVP
ID: 39889107
12.47.92.60
12.77.92.45
172.68.1.2


172.68.1.2 should be the first entry
12747.92.60 AND 12.77.92.45 ATT DNS servers should NOT be here
either use forwarders or use root hints
0
 

Author Comment

by:jobby1
ID: 39891070
I tired to restart the netlogon  and restarted  the whole server also no use. Still same error.
0
 

Accepted Solution

by:
jobby1 earned 0 total points
ID: 40091001
I restored the old backup. Some machines I rejoined to domain again. Now ok
0
 

Author Closing Comment

by:jobby1
ID: 40102430
I tried many options finally I restored the backup it is ok now.
0

Featured Post

Is Your AD Toolbox Looking More Like a Toybox?

Managing Active Directory can get complicated.  Often, the native tools for managing AD are just not up to the task.  The largest Active Directory installations in the world have relied on one tool to manage their day-to-day administration tasks: Hyena. Start your trial today.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

A safe way to clean winsxs folder from your windows server 2008 R2 editions
This article shows how to deploy dynamic backgrounds to computers depending on the aspect ratio of display
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
This tutorial will walk an individual through the process of configuring their Windows Server 2012 domain controller to synchronize its time with a trusted, external resource. Use Google, Bing, or other preferred search engine to locate trusted NTP …

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question