Solved

I need force route.

Posted on 2014-02-27
9
208 Views
Last Modified: 2014-03-16
Hello I have a Windows 7 between the router and the firewall.

I need that "computer A" access to the SharePoint behind the TMG using the url: "https://sharepoint.client.com".

This URL has a published rule in the TMG.
I have uploaded a diagram.
Network.pdf
0
Comment
Question by:limmontreefree
  • 5
  • 4
9 Comments
 
LVL 18

Expert Comment

by:Akinsd
ID: 39893417
can you ping 192.168.2.2 ?
If so, route is not the problem but access.

Check the ping 1st and let me know
0
 

Author Comment

by:limmontreefree
ID: 39894441
I cannot Ping because  the gateway  is 192.169.1.1
0
 
LVL 18

Expert Comment

by:Akinsd
ID: 39899522
I don't see any network on your diagram with 192.169.1.x network

By, "I cannot ping...." do you mean unsuccessful pings?
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:limmontreefree
ID: 39899660
Sorry it's 192.168.1.1.

Thanks
0
 
LVL 18

Expert Comment

by:Akinsd
ID: 39899684
What model is your router and firewall?

Input the following route on the router if it is a Cisco router
ip route 192.168.2.0 0.0.0.255 192.168.1.2

Paste the result of the following command from the firewall
route print

The following route may not be necessary if the firewall already has a default route exiting through 192.168.1.1

Input the following route on the firewall
route ADD 192.168.1.0 MASK 255.255.255.0 192.168.1.1METRIC 3 IF 2
0
 

Author Comment

by:limmontreefree
ID: 39925953
The router is a basic ADSL provided for the ISP.

In the router I  have add destination 192.168.2.0 gateway 192.168.1.2.

But I need In computer A the name resolution "https://sharepoint.client.com". was directly to 192.168.2.2 without asking DNS servers.

So my problem is route and name resolution, I think the route is done add the static route in the router ADSL.

Thanks and sorry to be late.
0
 
LVL 18

Accepted Solution

by:
Akinsd earned 500 total points
ID: 39933135
You will need to modify the lmhost file of the computers to bypass DNS queries for that host name. This requires administrator privilege.

Navigate to the file as shown below
C:\Windows\System32\ drivers\etc\lmhosts.sam

OR
%systemroot%\Windows\System32\drivers\etc (if using group policy especially if the system root is not on the C drive)

Open the file in notepad
Add the line
192.168.2.2 sharepoint


See the video below
https://www.youtube.com/watch?v=YGIT52jJTCA#t=118
0
 

Author Closing Comment

by:limmontreefree
ID: 39933172
Thank you very much.
0
 
LVL 18

Expert Comment

by:Akinsd
ID: 39933214
You're welcome
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OfficeMate Freezes on login or does not load after login credentials are input.
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question