Solved

H3C S5500 VLAN and switch

Posted on 2014-02-27
2
714 Views
Last Modified: 2014-03-31
I can't telnet to H3C S5500 with the message below. I can only access it through web access. Any idea ?
 In addition, how to show the configuration on the device ?

Which H3C L2 switch can support VLAN such that I can access the VLAN port to my client device ?

Great Tks.


******************************************************************************
* Copyright (c) 2004-2013 Hangzhou H3C Tech. Co., Ltd. All rights reserved.  *
* Without the owner's prior written consent,                                 *
* no decompiling or reverse-engineering shall be allowed.                    *
******************************************************************************


Login password has not been set !

Connection to host lost.

C:\Users\simon.mh.leung>
0
Comment
Question by:AXISHK
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 17

Accepted Solution

by:
TimotiSt earned 500 total points
ID: 39966200
You'll need to set up at least 1 user/password for telnet/ssh access:
Login password has not been set !

You can do that from the serial console for sure, I've never done it through the web interface but I'd assume it's somewhere in there too.
0

Featured Post

Three Considerations for Containers

Containers like Docker and Rocket are getting more popular every day. In my conversations with customers, they consistently ask what containers are and how they can use them in their environment. If you’re as curious as most people, read our article on Experts Exchange.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
Use of TCL script on Cisco devices:  - create file and merge it with running configuration to apply configuration changes
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

628 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question