Solved

Symantec backup exec 2010 Job rate decreased by 3 times

Posted on 2014-03-07
8
673 Views
Last Modified: 2014-03-14
Dear Experts,
I have Symantec Backup exec 2010 version 13.0 installed as a media server. There are around 10 server's backup running through this server by deploying backup exec agent on all the servers. The backup for all the job is running properly with the same rate as before. But with this single server the job rate is decreased suddenly. The jobs runs very fine for 2 or 3 days but after this, at some alternate day again it will reduce the job rate. There is no change in network also. I have also disabled the antivirus on the problematic server.The backup is going to tape drive. Please advice.
Regards,
0
Comment
Question by:ibu1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 2
8 Comments
 
LVL 42

Expert Comment

by:paulsolov
ID: 39915000
Check if anything if anything is running during this time.  If you have another job for instance going to the same media server that may be overlapping.
0
 
LVL 12

Author Comment

by:ibu1
ID: 39915467
Hi,
There is no extra process running during the backup time.
0
 
LVL 42

Expert Comment

by:paulsolov
ID: 39915470
When the jobs completes is there a particular volume or agent based backup that's slow like exchange, sql, etc..
0
Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

 
LVL 12

Author Comment

by:ibu1
ID: 39915491
I did not understand your comment.
0
 
LVL 12

Author Comment

by:ibu1
ID: 39915497
May be the snapshot will give u more idea.
job-rate.JPG
0
 
LVL 12

Author Comment

by:ibu1
ID: 39916911
It seems that the job is slow for all backup. I will start new question.
0
 
LVL 12

Accepted Solution

by:
ibu1 earned 0 total points
ID: 39916966
The job was reducing because of major changes in SAN switch configuration. Since it was done without my notice, I could not able to trace out myself.
0
 
LVL 12

Author Closing Comment

by:ibu1
ID: 39928707
Solved myself.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Microsoft will be releasing the Windows 10 Creators Update in just a matter of weeks. Are you prepared? Follow these steps to ensure everything goes smoothly and you don't lose valuable data on your PC.
Is your phone running out of space to hold pictures?  This article will show you quick tips on how to solve this problem.
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question