Solved

cisco VSS on Cat 4500 what are the commands to do this?

Posted on 2014-03-11
1
598 Views
Last Modified: 2014-03-17
can I use cisco VSS to join 2 4500 switches together in able to use LACP .

I want one member of the LACP group on each physical switch

thanks!!!!!
0
Comment
Question by:NAMEWITHELD12
1 Comment
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 39922005
You will need sup 7-E's or sup 7L-E's.

Here's the configuration guide for VSS on the 4500's.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1-2/XE_340/configuration/guide/config/vss.html#wp1130268
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question