Solved

Exchange Server 2010 Down. Please help me

Posted on 2014-03-12
13
207 Views
Last Modified: 2014-03-31
Dear EE's,

My exchange server is down. Can you please help me to make it up again. databases are dismounted. Error coming up while try to remove. DAG is not working as well. Please help me bot DAG and exchange database.
ExchangeServerDown01.jpg
0
Comment
Question by:Shamil Mohamed
  • 5
  • 2
  • 2
  • +4
13 Comments
 
LVL 5

Expert Comment

by:arjunvyavahare
ID: 39922936
Hi,

Try to run Eseutil /mh this happen due to dirty shutdown of your exchange server. and also make sure that IP version 6 is enabled on the server, if it is not enabled then enable it.

For more information how to use eseutil /mh, refer below link:

http://technet.microsoft.com/en-us/library/aa998760%28v=exchg.65%29.aspx

i hope this will help you.

Regards,
Arjun
0
 

Author Comment

by:Shamil Mohamed
ID: 39922945
how to use this command, can u please help me on this..??
0
 

Author Comment

by:Shamil Mohamed
ID: 39922946
Arjun,

Thanks for your reply.. please give a step by step way to make it up..
0
 
LVL 5

Assisted Solution

by:arjunvyavahare
arjunvyavahare earned 250 total points
ID: 39922953
Hi,

First step:

Make sure IP version 6 is enabled on your exchange server, which is shown in below: imageIPV6 Enable
If it is not enabled then enable it and restart your server and try to mount exchange database.

Second Step:

If First step failed to mount the database then run below command on exchange server to recovery exchange database:

eseutil /mh "c:\DBRecovery\Mailbox Database 0436312751.edb"

Also shown in below image:Database Recovery
I hope by using these two steps you can able to recovery your exchange database.
0
 
LVL 10

Expert Comment

by:cpmcomputers
ID: 39922964
Check the basics first
Are all services started and do you have sufficient free space on your drives

Check event log for any reported issues
0
 

Author Comment

by:Shamil Mohamed
ID: 39922995
I just wanna attach a file.. the error which coming once am trying to mount database
ExchangeServerDown02.jpg
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 7

Expert Comment

by:jimmithakkar
ID: 39923037
Hi,

need to check DNS name resolution, or may use cmd ipconfig/flushdns and ipconfig/registerdns or need to restart both server

it will help you
0
 
LVL 8

Expert Comment

by:EvilKnievel
ID: 39923061
This may sound like a strange question, but is this a virtual server, and if so, what is the exact amount of memory assigned to the server?
There are known issues like this when the memory size isn't correct. For example, this error might occur of your server has 4100MB of virtual memory instead of 4096.
Hope this helps you out.
0
 
LVL 7

Expert Comment

by:jimmithakkar
ID: 39923112
while rebooting server it will fix memory issue
0
 
LVL 12

Assisted Solution

by:Md. Mojahid
Md. Mojahid earned 250 total points
ID: 39925865
This is specially  for DAG problem so first of all you have to check DAG and also check event log to be find reason.  and also check space on database drive and restart windows clustering service.
0
 
LVL 11

Expert Comment

by:hecgomrec
ID: 39926295
What is the amount of free memory without the databases mounted?

It looks like you are running out of memory and/or HD space.

You might not be able to solve your issue if you can put your hands on memory fast!!
0
 

Accepted Solution

by:
Shamil Mohamed earned 0 total points
ID: 39937070
I failed with exchange. Yes it's a virtual server.
I copied the mailbox files and virtual machines. I am going to reinstall from scratch then will put back these server and will try once more.
Bros I lost my hope actually..

Is that much difficult is this exchange server?

Anybody have any suggestions for me anything other than exchange mail server.?

Thank you
0
 

Author Closing Comment

by:Shamil Mohamed
ID: 39966112
I chose a different way to rectify.. but considering the advises mentioned below are quite expertise.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
A procedure for exporting installed hotfix details of remote computers using powershell
To show how to generate a certificate request in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.:  First we need to log into the Exchange Admin Center. Navigate to the Servers >> Certificates…
This video discusses moving either the default database or any database to a new volume.

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now