Solved

Engenius Wireless repeater

Posted on 2014-03-13
2
572 Views
Last Modified: 2014-03-17
Question, I use products from http://www.engeniusworks.com but I am open to others
I have a situation
4 model homes each are around 10' appart
first home as internet connection with a wireless router

second home I'd like to set up a directional wireless bridge to get the internet connection accross, then put a LAN switch on it. On this LAN switch I'd like to add a wireless access point so visitors can get to the internet, It will also have a CAT5e plugged into it and wil run to the third home

Third home will also include a LAN switch, the LAN switch will include a wireless access point for that home and a wireless bridge that will be connected to the forth home

Forth home will have a bridge connecting to the bridge on the third home
it wall also include a LAN switch that will have another wireless access point

any suggestions on which bridges to use to do this?
thanks
0
Comment
Question by:jsarinana
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 37

Accepted Solution

by:
bbao earned 500 total points
ID: 39928650
it seems you are going to connect the four homes in a chain mode, whcih is not recommended as any failure of wired switch or wireless bridge coudl cause the network behind the failed spot also disconnected.

better use a star mode in which all homes connect to the central internet connection via wireless bridge and use a swtich for the LAN in each home.
0
 
LVL 1

Author Closing Comment

by:jsarinana
ID: 39934811
thanks understood
0

Featured Post

Visualize your virtual and backup environments

Create well-organized and polished visualizations of your virtual and backup environments when planning VMware vSphere, Microsoft Hyper-V or Veeam deployments. It helps you to gain better visibility and valuable business insights.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question