Solved

Exchange 2013 - Event ID 1003

Posted on 2014-03-17
8
1,497 Views
Last Modified: 2016-11-25
We run MS Exchange 2013 v 15.0.775.38

All was fine until earlier today when we get Event 1003 logging every 5 seconds or so.

There have been no software or hardware changes.

Single Exch server in site.

Transport Service will not start

Multiple reboots.  AV removed (but same AV and config on other 2013 boxes with no issue).

Cannot find any info on this error.

please help!  Screen shot attached
Event ID 1003
0
Comment
Question by:dankilleen
8 Comments
 
LVL 6

Expert Comment

by:rick81
ID: 39935872
check your disk space on the server.  are any of the drives close to full?
0
 
LVL 23

Expert Comment

by:Mysidia
ID: 39935944
The exception code here is indeed a mouthful  "dynamic search folders per scope count receive quota exceeded"

This, by the way, suggests a user search folder / search indexing problem with a particular mailbox  and possible   excessive resource usage  that may be unrelated to the reason Transport service is failing to start.


I would suggest first...    make sure all your disk drives are accessible,  and there are 4GB minimum free on each.

Check dependencies of transport service:  Make sure Microsoft Exchange Active Directory topology service is started.


Then check the event viewer for errors on the Transport Service  in the application log.
0
 
LVL 10

Expert Comment

by:Vijaya Babu Sekar
ID: 39935949
You may try to delete the catalog index folder from EDB

How to do:

1. Log onto the Exchange 2013 server (active node first) and stop the Microsoft Exchange Search Indexer service.
2. Delete the catalog index folder for this database.
3. Start the Microsoft Exchange Search Indexer service.
4. Repeat steps 1-3 for the passive node.
5. If necessary, mount the database.


You may refer the below link:  

https://www.eventid.net/display-eventid-1003-source-MSExchangeIS-eventno-2804-phase-1.htm

Thanks.
0
Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

 
LVL 12

Expert Comment

by:Md. Mojahid
ID: 39935970
“ReinstallDefaultTransportAgents.ps1” file from the exchange management shell. The problem occurs because a valid “agents.config” file can not be found in the location “C:\Program Files\Microsoft\Exchange Server\TransportRoles\Shared\agents.config”. The default configuration for transport agents can be recovered by running “scripts\ReinstallDefaultTransportAgents.ps1¿.

Another possible solution is that the permission on the TransportRoles folder may be set incorrectly for the Network Service. The Network Service needs full permission on the TransportRoles folder and children.
0
 
LVL 1

Expert Comment

by:Jobgeor
ID: 39936033
Lookslike transport service corrupted.Please check the error events from source MSTransport service.
Please look for rename and restart the service.
http://social.technet.microsoft.com/Forums/exchange/en-US/39fe9fcd-4a8a-45cb-ab19-bd5c21e3de5b/transport-service-starts-for-a-wile-then-stops-even-on-a-clean-start-

Regards,
Joby George
0
 

Accepted Solution

by:
dankilleen earned 0 total points
ID: 39976411
It transpires this error was due to a calendaring sync issue from a third party App.  We had Gold Support logged at MS and the ISV had the same.  MS had never seen it before,  ISV fixed by changing their code.
0
 

Author Closing Comment

by:dankilleen
ID: 39985520
third party error and fix
0
 

Expert Comment

by:Dimax
ID: 41901932
Hi, I know this is an old thread but I am having the same issue and also have some third party installed on the Exchange server. Can you share which third party app that caused your issue?

Thanks
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Scam emails are a huge burden for many businesses. Spotting one is not always easy. Follow our tips to identify if an email you receive is a scam.
MS Outlook is a world-class email client application that is mainly used for e-communication globally.  In this article, we will discuss the basic idea about MS Outlook, its advanced features, and types of MS Outlook File formats.
In this video we show how to create an Address List in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Organization >> Ad…
This video demonstrates how to sync Microsoft Exchange Public Folders with smartphones using CodeTwo Exchange Sync and Exchange ActiveSync. To learn more about CodeTwo Exchange Sync and download the free trial, go to: http://www.codetwo.com/excha…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question