Solved

Accessing 2nd interface over VPN tunnel

Posted on 2014-03-27
1
207 Views
Last Modified: 2014-03-27
Wondering if anyone can help.

I have two sites connected via a IPsec Site to Site VPN connection using two ASA5510 firewalls.

On one Site (DC) I also have a second interface with a leased line and 3rd party router connected.

The internal network in DC needs to be Natd to 172.24.130.240/28 when accessing the 3rd party server on 195.110.246.119 which is done via dynamic policy nat in the firewall.

The DC internal network 10.50.9.0/24 can see/ping the the 3rd party router fine.

I want to know if it is possible for the anything on the other site network 10.50.1.0/24 to access the server using the Nat also.

I have spare routers that I can use each side if I need.

Diagram attached.

Thanks.Diagram of problem.
0
Comment
Question by:adispiric
1 Comment
 

Accepted Solution

by:
adispiric earned 0 total points
ID: 39959285
solved by adding access list rule:

access-list outside_nat_outbound extended permit ip 10.50.1.0 255.255.255.0 195.110.246.101 255.255.255.255

into DC asa.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The article explains the protocols and technology which is involved when two computers on different TCP/IP networks communicate with each other. In the diagram, a router is used to segregate two networks. The networks are 192.168.1.0/24 and 192…
Please see preceding article here: http://www.experts-exchange.com/Networking/Operating_Systems/A_11209-Root-Bridge-Election.html Figure 1 After Root Bridge has been elected, then what?..... Let's start by defining a Root Port in la…
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question