Solved

Cisco RV180W VPN configuratin

Posted on 2014-03-27
8
248 Views
Last Modified: 2014-04-01
I am trying to set up the VPN on a Cisco RV180W router. I will be honest this is something I know very little about and I need a step by step guide on how to do it
0
Comment
Question by:miller75
  • 5
  • 3
8 Comments
 
LVL 9

Expert Comment

by:M Roe
ID: 39960023
Make sure you have the latest firmware on this device First.  Just had issues with one and firmware fixed them.

Manual to setup.  Used this to configure mine


http://s3.amazonaws.com/szmanuals/5a62f1b00f2818b98cb8964ec2ab433f
0
 

Author Comment

by:miller75
ID: 39962065
I have followed the guide but cant connect, it just hangs saying connecting. This is the log file

2014/03/28 16:39:01 [STATUS]OS Version: Windows 7
2014/03/28 16:39:01 [STATUS]Windows Firewall Domain Profile Settings: ON
2014/03/28 16:39:01 [STATUS]Windows Firewall Private Profile Settings: ON
2014/03/28 16:39:01 [STATUS]Windows Firewall Private Profile Settings: ON
2014/03/28 16:39:01 [STATUS]One network interface detected with IP address x.x.x.x
2014/03/28 16:39:01 [STATUS]Connecting...
2014/03/28 16:39:01 [DEBUG]Input VPN Server Address = x.x.x.x
2014/03/28 16:39:01 [STATUS]Connecting to remote gateway with IP address: x.x.x.x
2014/03/28 16:39:02 [WARNING]Server's certificate doesn't exist on your local computer.
0
 
LVL 9

Expert Comment

by:M Roe
ID: 39962176
Is the VPN going to another VPN device or to a microsoft server?



Mine is like this

Client(win 7)---RV180(static IP)---internet----RV180(static IP)----Server 2008
0
 

Author Comment

by:miller75
ID: 39962286
It's client ---netgear dn3000 - internet - RV180(static ip)
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 9

Expert Comment

by:M Roe
ID: 39962364
what type of connection pptp, ipsec, etc
0
 
LVL 9

Accepted Solution

by:
M Roe earned 500 total points
ID: 39962522
Connect to the rv180 and go to security SSL certificate

Export for client

install certificate on client machine
0
 

Author Comment

by:miller75
ID: 39962788
Thanks guys I have exported the certificate and added it to the folder, I still cant connect now I am getting the following in the log

2014/03/28 21:05:22 [STATUS]OS Version: Windows 7
2014/03/28 21:05:22 [STATUS]Windows Firewall Domain Profile Settings: ON
2014/03/28 21:05:22 [STATUS]Windows Firewall Private Profile Settings: ON
2014/03/28 21:05:22 [STATUS]Windows Firewall Private Profile Settings: ON
2014/03/28 21:05:22 [STATUS]One network interface detected with IP address x.x.x.x
2014/03/28 21:05:22 [STATUS]Connecting...
2014/03/28 21:05:22 [DEBUG]Input VPN Server Address = x.x.x.x
2014/03/28 21:05:22 [STATUS]Connecting to remote gateway with IP address: x.x.x.x
2014/03/28 21:05:23 [STATUS]Remote gateway was reached by https ...
2014/03/28 21:05:23 [WARNING]Remote gateway wasn't reached...
2014/03/28 21:05:23 [WARNING]Failed to connect.
2014/03/28 21:05:33 [WARNING]Remote gateway wasn't reached...
2014/03/28 21:05:33 [WARNING]Failed to connect.
2014/03/28 21:05:33 [WARNING]Failed to connect!
0
 
LVL 9

Expert Comment

by:M Roe
ID: 39969684
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…
Many functions in Excel can make decisions. The most simple of these is the IF function: it returns a value depending on whether a condition you describe is true or false. Once you get the hang of using the IF function, you will find it easier to us…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now