Solved

Juniper networks EX 3200

Posted on 2014-03-27
1
392 Views
Last Modified: 2016-02-11
i have a  Juniper networks and i am trying to bring in factory default settings,

i go through hyper terminal connect through console and it start loading and then it stuck nothing else happen please need advise


U-Boot 1.1.6 (May 19 2010 - 05:03:13)

Board: EX3200-24T 3.3
EPLD:  Version 6.0 (0x85)
DRAM:  Initializing (512 MB)
FLASH: 8 MB
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found

ELF file is 32 bit
Consoles: U-Boot console

FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.2
(builder@shoth.juniper.net, Wed May 19 06:04:27 UTC 2010)
Memory: 512MB
Loading /boot/defaults/loader.conf
/kernel data=0x8d8e8c+0x947cc syms=[0x4+0x7a1a0+0x4+0xad2a2]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000e0 ...


U-Boot 1.1.6 (May 19 2010 - 05:03:13)

Board: EX3200-24T 3.3
EPLD:  Version 6.0 (0x85)
DRAM:  Initializing (512 MB)
FLASH: 8 MB
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found

ELF file is 32 bit
Consoles: U-Boot console

FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.2
(builder@shoth.juniper.net, Wed May 19 06:04:27 UTC 2010)
Memory: 512MB
Loading /boot/defaults/loader.conf
/kernel data=0x8d8e8c+0x947cc syms=[0x4+0x7a1a0+0x4+0xad2a2]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000e0 ...


from here nothing else happen i press any keys it is just stopped i think it is IOS problem but i am not sure please let me know what else i can do to fix this problem

thanks
0
Comment
Question by:ciscoquestion
1 Comment
 
LVL 9

Accepted Solution

by:
David Piniella earned 500 total points
ID: 40269342
since you can't login, you can do it through the lcd panel, like so: http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/task/configuration/ex-series-switch-default-factory-configuration-reverting.html

To revert to the factory-default configuration by using the LCD panel:

Press the Menu button until you see MAINTENANCE MENU on the panel.
Press the Enter button.
Press Menu until you see FACTORY DEFAULT.
Press Enter. The display says RESTORE DEFAULT?
Press Enter. The screen flashes FACTORY DEFAULT IN PROGRESS and returns to the idle menu.
Complete the initial configuration of the switch.
0

Featured Post

How Do You Stack Up Against Your Peers?

With today’s modern enterprise so dependent on digital infrastructures, the impact of major incidents has increased dramatically. Grab the report now to gain insight into how your organization ranks against your peers and learn best-in-class strategies to resolve incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Our Group Policy work started with Small Business Server in 2000. Microsoft gave us an excellent OU and GPO model in subsequent SBS editions that utilized WMI filters, OU linking, and VBS scripts. These are some of experiences plus our spending a lo…
IT certifications are a concrete representation of continual learning on the part of the candidate.  Continual learning is necessary for the long term success of an IT professional, but are IT certifications the right path for you?
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question