Solved

How to insert another WS-X6708-10G-3C card into a C6509-VSS system?

Posted on 2014-03-28
2
898 Views
Last Modified: 2014-03-31
Hi,
I want to add a second WS-X6708-10G-3C card into each side of a C6509 VSS system. I was looking for a howto but couldn't find one. As this is a vss system, I guess, I have to do several steps in a certain order. Does somebody know of a howto or can explain briefly the necessary steps ? Thanks in advance.

Olaf
0
Comment
Question by:olaf_joerk
2 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 500 total points
ID: 39963187
The 6509 supports online insertion and removal. No configuration or steps are required other than just inserting the module.

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/97065-oir-mod-catsw.html
0
 

Author Comment

by:olaf_joerk
ID: 39966062
Thank you for your hint. I read some more pages and it seems to be easy. I only had my doubts, because I read an article in a news group where inserting such a module crashed the VSS system. But this discussion ended with no real explanation for the crash. So I just wanted to be sure. The VSS system is our networks backbone. Good job for friday night ...
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now