Solved

Cisco Redundant BGP from two separate locations

Posted on 2014-04-01
1
461 Views
Last Modified: 2014-04-16
Hello,

I am having trouble redistributing a redundant BGP connection. We have one MPLS BGP connection at our Colo and one Redundant MPLS BGP connection at our HQ.

The HQ Redundant MPLS BGP connection does not seem to show up in the topology. Here is a basic config of what I have now.



CURRENT COLO CONFIG

router bgp 64555
 bgp log-neighbor-changes
 network 10.5.0.0 mask 255.255.0.0
 network 10.116.239.0 mask 255.255.255.252
 redistribute connected
 redistribute static route-map def
 redistribute eigrp 499 route-map rm-mpls-eigrp2bgp
 neighbor 10.116.239.x remote-as 13xxx
 neighbor 10.116.239.x version 4
 neighbor 10.116.239.x soft-reconfiguration inbound
 default-information originate
 no auto-summary


router eigrp 499
 network 10.5.0.0 0.0.255.255
 redistribute static
 redistribute bgp 64555 metric 100 1 255 1 1500 route-map rm-mpls-bgp2eigrp


-----------------------------------------------------------------------------------------------------

CURRENT HQ CONFIG

router bgp 64556
 bgp log-neighbor-changes
 network 10.4.2.0 mask 255.255.255.0
 network 10.116.239.4 mask 255.255.255.252
 redistribute connected metric 255
 redistribute static metric 255
 redistribute eigrp 499 route-map rm-mpls-eigrp2bgp
 neighbor 10.116.239.6 remote-as 13979
 neighbor 10.116.239.6 version 4
 neighbor 10.116.239.6 soft-reconfiguration inbound
 default-information originate

router eigrp 499
 distribute-list USTH-MPLS-DMVPN-EIGRP-ALLOWED out GigabitEthernet0/1
 network 10.4.0.0 0.0.255.255
 network 10.116.239.4 0.0.0.3
 redistribute static
 redistribute bgp 64555 metric 200 1 255 1 1500 route-map rm-mpls-bgp2eigrp
0
Comment
Question by:dcawood
1 Comment
 
LVL 6

Accepted Solution

by:
Hassan Besher earned 500 total points
ID: 39971410
if you can give topology drawing it will be better,also:

#show ip bgp summ
#sh ip bgp
0

Featured Post

Zoho SalesIQ

Hassle-free live chat software re-imagined for business growth. 2 users, always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now