Solved

I receive errors running report Via Report Manager or when I am connected to the Report Server. Reports run ok if I disconnect Report Builder from the Report Server.

Posted on 2014-04-01
11
1,369 Views
Last Modified: 2014-04-09
Hi Experts,

I am using SSRS reports using an ODBC connection to the database.

SSRS reports run/authenticate fine using 32bit connection (ODBC32). But when I join the 64bit (ODBC)connection (Report Manager) then reports crash. It doesn't seem to authenticate the user.

I have set this up a few times but the problem seems to go away somehow? It could be a server setting? I would like to hear any possible fix's I should try as I have the same problem again and need it fixed ASAP.

The error I receive when I try to run the report when I have connected the Report builder to the Report Server is as follows:

Unsupported RPL stream version detected: 104.116.1344302189. Expected version: 10.6.
----------------------------
An error occurred during client rendering.

Many thanks in Advanced!
0
Comment
Question by:Papa1NZ
  • 6
  • 5
11 Comments
 
LVL 12

Expert Comment

by:Koen Van Wielink
ID: 39971870
If you google the error you'll find that it's a fairly general error description with a host of underlying problems for different people. But a few suggestions I found:

- Remove the page break indicator from the tablix properties and redeploy the report
- Restart the agent service
- If you're running the reports through SharePoint it might be that you have to update the SharePoint add-in.

I haven't seen the error myself before, this is just some stuff I found online. Hope it helps.
0
 

Author Comment

by:Papa1NZ
ID: 39973728
Hi Kvwielink,

Thanks for those bits of information. I've actually already done lots of google searches including the above details you mentioned but none have helped so far. I am not using sharepoint.

Its a really strange issue. I am now moving the SSRS databases to be stored directly on the SSRS server rather than to the SQL Server. Hopefully this might change things? However if you have any other thoughts I would like to hear them.

Many thanks,
0
 

Author Comment

by:Papa1NZ
ID: 39973998
I have just moved the SSRS database to be on the same server as the SSRS instance and no change :(
0
 
LVL 12

Expert Comment

by:Koen Van Wielink
ID: 39974002
What's the driver you're using in your ODBC connection?
0
 

Author Comment

by:Papa1NZ
ID: 39974104
Its a modified ODBC driver for an application. Do you think that might be the issue? I have found that the Report Manager will connect directly to the database server and run a report fine. But if I connect up the report via the ODBC driver the report fails to authenticate to the database. It fails at the authentication going via the ODBC driver and does not produce any logs.
0
Backup Your Microsoft Windows Server®

Backup all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

 
LVL 12

Expert Comment

by:Koen Van Wielink
ID: 39974165
It might be. Any chance to test it using a standard ODBC driver like SQL Server Native Client 10.0? Or even the standard SQL Server driver?
0
 

Author Comment

by:Papa1NZ
ID: 39976927
Hi Kvwielink,
Yes the native client connection to the database works fine. I can run a report ok. Only occurs when I connect via the ODBC driver.
0
 
LVL 12

Expert Comment

by:Koen Van Wielink
ID: 39977088
But when you create another ODBC connection using a different driver, does it still work?
0
 

Accepted Solution

by:
Papa1NZ earned 0 total points
ID: 39979679
Yes a native odbc connection going to the same database with the same user works fine. So this is pointing out that the issue is with the ODBC driver. I have raised the issue with the ODBC Driver developers.  Many Thank for your help Kvwielink.
0
 
LVL 12

Expert Comment

by:Koen Van Wielink
ID: 39980003
Glad I could help, even though I wasn't able to solve the issue. Good luck with it. Would be nice if you could give us an update if you do get it fixed.
0
 

Author Closing Comment

by:Papa1NZ
ID: 39988240
Kvwielink helped point out where the problem is occurring. Which appears to be with an application ODBC driver.
0

Featured Post

Ransomware-A Revenue Bonanza for Service Providers

Ransomware – malware that gets on your customers’ computers, encrypts their data, and extorts a hefty ransom for the decryption keys – is a surging new threat.  The purpose of this eBook is to educate the reader about ransomware attacks.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…

912 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now