Solved

Cisco Router Config

Posted on 2014-04-02
5
330 Views
Last Modified: 2014-04-02
Hi all I have added a rule on our Cisco router to allow access on Port 53389, the command I used was

ip nat inside source static tcp 192.168.0.252 53389 interface Dialer0 53389


however whenever the router reboots it seems to loose that information and I need to read it in

any idears?
0
Comment
Question by:pepps11976
  • 3
  • 2
5 Comments
 
LVL 16

Accepted Solution

by:
max_the_king earned 500 total points
ID: 39971737
Hi,
you need to give the command:

copy run start
 and it will magically write on flash memory and keep it on reboot

hope this helps
max
0
 

Author Comment

by:pepps11976
ID: 39971740
Thankyou
0
 

Author Comment

by:pepps11976
ID: 39971745
sorry for the Newbie question but when it asks

Destination filename (startup-config)?

what do I put there?
0
 
LVL 16

Expert Comment

by:max_the_king
ID: 39971746
enter to confirm
0
 

Author Comment

by:pepps11976
ID: 39971749
lol

Thanks :)
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Sharing same loopback address on different switches 1 48
Cisco 3560 switches not seeing VTP V3 12 66
Cisco ISE or Windows NPS for RADIUS and 802.1x 2 49
cisco asa proxy arp 2 13
How to configure Site to Site VPN on a Cisco ASA.     (version: 1.1 - updated August 6, 2009) Index          [Preface]   1.    [Introduction]   2.    [The situation]   3.    [Getting started]   4.    [Interesting traffic]   5.    [NAT0]   6.…
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question