Solved

Hit My DVR from IPhone

Posted on 2014-04-02
1
683 Views
Last Modified: 2014-04-18
OK, so this isn't really for me, it's for my boss.  I believe he may be deranged, he wants to see the cameras on the DVR from his Iphone.

I started with ports on the DVR, it wants to use port 3000.
They use a Linksys Firewall, so I put in a rule that said something along the lines of "if you hit the WAN interface of this firewall with port 3000, forward it to 192.168.2.100" which is the IP of the DVR.

I have the username and password correct, but I get a timeout error trying to login (using Pegaso Lite).

My DVR has entries for DynDNS and such, but I can't see how that would work since the DVR is behind the NAT firewall.

Hope to hear some suggestions!
0
Comment
Question by:dougp23
1 Comment
 
LVL 78

Accepted Solution

by:
David Johnson, CD, MVP earned 500 total points
ID: 39973231
dyndns is only useful in that it gives you a name rather than a bunch of numbers to remember and if you have dynamic dhcp from your isp and your ip address changes it will take care of that for you.. as long as you have the client duc running.

you may or may not be able to view the dvr as it may be using flash and apple products don't support flash.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Etherchannel trunking 10 41
DNS @ Naked Domain Record 5 68
Martian Packets Unix 5 31
Need Help setting up a Virtual Lan on existing network for Test Domain 10 58
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now