Solved

sonicwall UTM device can you use the x0-x5 ports to create a VPN to another site?

Posted on 2014-04-03
5
254 Views
Last Modified: 2014-04-03
I have a couple of TZ215 that I want to connect via VPN site to site.  I have to use one of the X2-X6 ports on the main site because of other configurations that are on the main LAN port.  Has anyone done this before?  If so do you have any good instructions?
0
Comment
Question by:Dwci
  • 3
  • 2
5 Comments
 
LVL 20

Expert Comment

by:carlmd
ID: 39976064
You should not have a problem doing that. Use the Wizard (upper right hand corner of screen) to create the STS vpn.
0
 

Author Comment

by:Dwci
ID: 39976476
I have tried that and I can get the tunnel up but I cannot ping devices on either side of the network.   I can get the sonicwall local ip's to ping but not things connected to the network on either side.
0
 
LVL 20

Accepted Solution

by:
carlmd earned 500 total points
ID: 39976505
Did you create the sts vpn on the Sonicwall devices on both ends?

Did you define the subnets accessible on each side of the tunnel?
0
 

Author Comment

by:Dwci
ID: 39976508
How do I define the subnets accessible on either side of the tunnel, that is probably what I am not doing right.
0
 

Author Closing Comment

by:Dwci
ID: 39976540
Well I am not sure that what you specifically told me is the answer but I removed all of my vpn connections on both sides, all address objects, routes etc and then re-added using the wizard and it seems to be working great now.  Thanks
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question