Solved

How to setup a trunk dot1q on HP Procurve ?

Posted on 2014-04-06
8
1,162 Views
Last Modified: 2014-04-07
Hi Experts,
several years I was working on cisco switches.
The config is always very clear and easy to read.

Now I have to setup some vlan settings on a HP Procurve switch.
Can you help me to configure the trunks and the vlan config ?
0
Comment
Question by:Eprs_Admin
  • 4
  • 4
8 Comments
 
LVL 50

Expert Comment

by:Don Johnston
ID: 39982799
Some of it is similar to Cisco... Some is not.  :-)

VLAN 12
 tagged A12
VLAN 13
 tagged A12
VLAN 14
 tagged A12

This creates 3 VLANs (12-14) and makes port A12 the (in Cisco terminology) a trunk.

By default, VLAN 1 will be the native VLAN (untagged).
0
 

Author Comment

by:Eprs_Admin
ID: 39982951
ok thanks.
Now I need connection from my network to the vlan, because the vcenter is not in this vlan.
Can you also help me with this ?
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 39982961
"connection from my network to the vlan"

Sorry, I don't understand what you're asking.
0
 

Author Comment

by:Eprs_Admin
ID: 39982977
lets say, the vlan is 1955.
I think the routing is missing from vlan to vlan.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 50

Expert Comment

by:Don Johnston
ID: 39982991
Depending on the platform, you may need to enter the "ip routing" command in global config mode.  

Did you assign ip addresses to the VLANs? Is that IP address the default gateway for the hosts on that VLAN?
0
 

Author Comment

by:Eprs_Admin
ID: 39983010
I had no IP addresses on the vlans :-(
Of course then it cannot work.
0
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 39983025
I didn't know you wanted to do routing.

ip routing
VLAN 12
 ip address 192.168.12.1 255.255.255.0
 tagged A12
VLAN 13
 ip address 192.168.13.1 255.255.255.0
 tagged A12
VLAN 14
 ip address 192.168.14.1 255.255.255.0
 tagged A12
0
 

Author Comment

by:Eprs_Admin
ID: 39983044
ok cool.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now