Solved

smart array p822

Posted on 2014-04-08
3
510 Views
Last Modified: 2014-04-10
when i go to the hp array configuration utility, i get the following warning. see attachment. what does it mean and how do i fix it ?
Capture.PNG
0
Comment
Question by:ttrbrtsn
  • 2
3 Comments
 
LVL 55

Accepted Solution

by:
andyalder earned 500 total points
ID: 39986752
Means that the controller detected errors on the cache (probably correctable ECC errors) and has slowed it down to avoid further errors. You would fix it by replacing the cache module but it's probably still under warranty so log a call with HP and they'll send you a replacement. You will probably have to fit it yourself but it's just a SODIMM with an extra wire for the supercapacitor/battery.

It's a poorly documented error and indeed only certain firmware levels even bother to tell you that it's under-performing since the lower clockspeed is still a darned sight faster than disk.
0
 

Author Comment

by:ttrbrtsn
ID: 39986875
there isnt anything i can do software wise ? like clearing out the cache ?
0
 
LVL 55

Expert Comment

by:andyalder
ID: 39986904
Nope, it's degraded hardware. You can ignore the message though since it still works albeit a bit slower.
0

Featured Post

Simplifying Server Workload Migrations

This use case outlines the migration challenges that organizations face and how the Acronis AnyData Engine supports physical-to-physical (P2P), physical-to-virtual (P2V), virtual to physical (V2P), and cross-virtual (V2V) migration scenarios to address these challenges.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

this article is a guided solution for most of the common server issues in server hardware tasks we are facing in our routine job works. the topics in the following article covered are, 1) dell hardware raidlevel (Perc) 2) adding HDD 3) how t…
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question