• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 361
  • Last Modified:

asa 5505 transparent mode ping

I have put my ASA 5505 in Transparent mode but I can't ping the devices connected. When I use my two computers to test, I have one with the router address and the other computer set with the server address both with subnet of on the computer with the server address the gateway is
When I do a ping test and watch the interface from e0/1 (server) to e0/0 (outside/ Router) it show packets input  and received but no reply.
1 Solution
Hassan BesherCommented:
1)add inspect icmp under class inspection_default

2) add nameif inside under interface Vlan5
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now