Solved

Site to Site Sonicwall VPN

Posted on 2014-04-09
3
318 Views
Last Modified: 2014-04-09
I have a VPN that is showing connection and can ping from TZ to NSA but cannot ping NSA to TZ.  Getting IKE Responder: Route table overrides VPN policy.  Have tried numerous things and continue to get same result.  Help!
0
Comment
Question by:Captain_John
  • 2
3 Comments
 
LVL 10

Accepted Solution

by:
tmoore1962 earned 500 total points
ID: 39989201
Must have a static route configure in the NSA that is over riding the VPN routes
0
 

Author Comment

by:Captain_John
ID: 39989222
That's what I figured, but cannot find it.  Not much in there except for default routes. I will look again, thanks.
0
 

Author Comment

by:Captain_John
ID: 39989244
That did it!  I have a secondary wifi router in my network that has a LAN IP subnet conflicting with the remote VPN subnet.  Thanks very much.  It was showing in routing table as WLAN so did not see the conflict until I moused over it.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

For a while, I have wanted to connect my HTC Incredible to my corporate network to take advantage of the phone's powerful capabilities. I searched online and came up with varied answers from "it won't work" to super complicated statements that I did…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question