<div>
CatTools is attempting to send invalid commands to the device and the SG300 is returning an error because of it.<br />
<br />
CatTools supports only the Cisco Catalyst line of switches. The SG300 is a small business switch and isn't supported.<br />
<br />
It's possible that you can write a module to make CatTools work with the SG300, but it doesn't look like it will work out of the box.
</div>


CatTools is attempting to send invalid commands to the device and the SG300 is returning an error because of it.

CatTools supports only the Cisco Catalyst line of switches. The SG300 is a small business switch and isn't supported.

It's possible that you can write a module to make CatTools work with the SG300, but it doesn't look like it will work out of the box.

<div>
Good to know. They haven't updated their site to reflect this yet. So you've got it working with the new version?
</div>


Good to know. They haven't updated their site to reflect this yet. So you've got it working with the new version?

<div>
<div class="content wysiwyg-content">
Hi Experts,<br />
<br />
I want to add the cisco switch SG300 to KIWI CATTOOLS.<br />
I get always the error message, see picture.<br />
What does it mean ?<br />
<a href="https://filedb.experts-exchange.com/incoming/2014/04_w15/844407/CatToolsError.JPG" target="_blank" class="file-inline" title="CatTools Error (47 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>CatToolsError.JPG</a>
</div>
</div>


CatToolsError.JPG

Hi Experts,

I want to add the cisco switch SG300 to KIWI CATTOOLS.
I get always the error message, see picture.
What does it mean ?

CatTools error with Cisco SG300 switch

Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).

Cisco

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.