Solved

SSL VPN

Posted on 2014-04-10
5
443 Views
Last Modified: 2014-04-15
i want to implemented a ssl VPN solution to customer
 where they login using https://firewallip
 then minimize the connected VPN
 and able to access the internal resources of company
 is it possible ? if yes Please let me know ?

ASA provide
SSL Client less VPN
SSL VPN Client ??i don't know what is this ?
Client IPSEC IKEv1 : using VPN client
Client Anyconnect : using VPN client software
L2TP /IPSEC : using windows inbuilt VPN software

which one i should use
0
Comment
Question by:mohannitin
  • 3
  • 2
5 Comments
 
LVL 11

Accepted Solution

by:
Giladn earned 500 total points
ID: 39991523
I guess you are looking for an external and internal solution?
how many users are there?
I use this appliance -
http://www.juniper.net/us/en/products-services/security/sa-series/sa2500/

very good from 10-50 users including users portal+vpn access, terminal etc what ever you decide, licensing is not expensive and the support is excellent.

Hope this helps,

Gilad
0
 

Author Comment

by:mohannitin
ID: 39991557
we are a cisco house company. we should be something similar in cisco ?
0
 
LVL 11

Expert Comment

by:Giladn
ID: 39991567
0
 

Author Comment

by:mohannitin
ID: 39991655
cisco said we can achieve this by using any connect

if we have any connect premium license then
1)      Users would be able to connect from outside via https://firewallip
2)      They will not need any client installed on the computer
3)      They do not need browser to access internal resources, we do not want to use bookmarks we want straight access to lan.

All the traffic will will use ssl vpn to send the traffic to internal resources

is that correct ?
0
 

Author Closing Comment

by:mohannitin
ID: 40001855
thanks
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Domain administrator account is locked out 31 92
Home firewall recommendations 11 91
how to enable SSH in Nexus OS 1 28
SMB Packet - File Data 4 46
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question