Solved

Use Existing PRI (Nortel Call Center) network - BRI Device

Posted on 2014-04-11
2
262 Views
Last Modified: 2014-04-13
Hi All,

I have an existing PRI connecting to our Nortel Networks Call Center.  I recently had to incorporate a Tandberg 880 on my network which is asking for an ISDN/BRI setup.  Is there a way to configure 2 channels from my existing PRI to the Tandberg?  BRIs are no longer available and an addition PRI is overkill.  Or, is there another way to simulate this ISDN/BRI connection?

Thanks so much!
0
Comment
Question by:pscanevit
2 Comments
 
LVL 17

Accepted Solution

by:
TimotiSt earned 500 total points
ID: 39996125
You'll need something like a PRI-BRI add-drop multiplexer.
This looks useful on first read:
http://www.isdnconnect.com/level_1/applications.html
0
 

Author Comment

by:pscanevit
ID: 39997820
Thank you so much...this leads me in the right direction.  We are a small company and I'm not sure the expense is worth accommodating our Spain company.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cat6A Cabeling 3 53
discontiguous network and EIGRP 12 69
EIGRP Configuration 2 48
Network Vs Redistribute Connected Commands 3 9
The article explains the protocols and technology which is involved when two computers on different TCP/IP networks communicate with each other. In the diagram, a router is used to segregate two networks. The networks are 192.168.1.0/24 and 192…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question