Eprs_Admin
asked on
vmware configuration issues
Hi Experts,
I have vmware running with version 5.5
I have configured a VSA cluster.
I thought my hosts have the same config but I get NONCOMPLIANT Errors on the summary tab.
What does it mean ?
Host is not in compliance with the attached profile !
I cannot find differences.
I have vmware running with version 5.5
I have configured a VSA cluster.
I thought my hosts have the same config but I get NONCOMPLIANT Errors on the summary tab.
What does it mean ?
Host is not in compliance with the attached profile !
I cannot find differences.
ASKER
Yes I have a VSA HA CLuster.
Just HA is enabled on my Cluster, no FT.
When I read this :
Why I need FT logging ?
All my NICS are on 1000Mbps. Just one NIC is down, because of missing cable.
Just HA is enabled on my Cluster, no FT.
When I read this :
If only HA is enabled, ensure that:
FT logging NIC speed is at least 1000 Mbps.
At least one shared datastore exists.
FT logging is enabled.
VMotion NIC speed is at least 1000 Mbps.
All the hosts in the cluster have the same build for Fault Tolerance.
The host hardware supports Fault Tolerance.
VMotion is enabled.
Why I need FT logging ?
All my NICS are on 1000Mbps. Just one NIC is down, because of missing cable.
ASKER
see the pics of both hosts...
host1.JPG
host1.JPG
ASKER
ASKER
is it maybe a problem with the host profiles ?
FT logging is a different licensed function not required.
fix the network missing cable.
Are you using Host Profiles?
fix the network missing cable.
Are you using Host Profiles?
ASKER
Yes I used it.
When I detach the host profile, do I loose my network config ?
When I detach the host profile, do I loose my network config ?
You can remove it without changes to the host occurring.
ASKER
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Cool Thanks.
see here
A cluster shows as Noncompliant on the Cluster Compliance tab (1017471)