Solved

Setup/Configuring Cisco Catalyst 3750 v1 Switch

Posted on 2014-04-14
2
566 Views
Last Modified: 2014-04-15
I have not logged into a Cisco switch or router since school (2001). I have 2 Catalyst 3750 that I want to use the switch ports and fiber uplinks. I purchased them on eBay.  they appear to have a username and password configured. I need to erase/reset to factory default, then enable the switch ports and fiber uplinks.  Can someone guide me please?
0
Comment
Question by:JKEITHWARD
2 Comments
 
LVL 26

Accepted Solution

by:
pony10us earned 500 total points
ID: 40000558
0
 
LVL 10

Expert Comment

by:Rafael
ID: 40000646
After the password is reset from the link you should be able to log into the router using the cisco default. You can also go straight into the config after the password is reset as pony10us linked. to you.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
New modem? 4 77
Cisco SF300-24PP 24-Port 10/100 PoE+ Managed Switch 4 48
KVM switch 7 40
UPS and BTU calculation 3 49
The following recovery method will work on All Cisco Switchs that run ISO software. You will need a good copy of the IOS version you want you use saved on your PC and a Com's Cable. The software for these switches comes as a .tar file. Tar is …
In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…
Finds all prime numbers in a range requested and places them in a public primes() array. I've demostrated a template size of 30 (2 * 3 * 5) but larger templates can be built such 210  (2 * 3 * 5 * 7) or 2310  (2 * 3 * 5 * 7 * 11). The larger templa…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question