Solved

Cisco switch enable telnet

Posted on 2014-04-16
2
377 Views
Last Modified: 2014-04-16
Getting the error password not set.

I followed the steps in the link below..Getting error: Password required, but none set error message.

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/46960-config-telnet.html
Suggestions?
0
Comment
Question by:sullend
2 Comments
 
LVL 12

Accepted Solution

by:
Infamus earned 500 total points
ID: 40004580
Do you have local account?

try

config t

line vty 0 15

login local
0
 

Author Closing Comment

by:sullend
ID: 40004636
PERFECT
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question