Solved

DHCP not Updateing DNS

Posted on 2014-04-16
2
1,588 Views
Last Modified: 2014-04-17
I have a newer VDI environment.  Two DHCP servers (Win2008R2) are assigned to hand out IP's to Win7 clients.  

The scope properites are set to:
enable DNS Dynanically ... Always dynaically update DNS A and PTR records... Discard A and PTR recros when lease is deleted... Dynamically updated DNS An dn PTR records for clients that do not request.

Still my DNS records of my VDI are chronically inaccurate.

Ideas?
0
Comment
Question by:whoam
2 Comments
 
LVL 36

Accepted Solution

by:
Mahesh earned 500 total points
ID: 40005045
you must set credentials in DHCP server (IPV4 in DHCP Console) properties \ advanced tab, other wise this process will not work
Note that account must be standard domain user account with non expiring password
This will ensure that when DHCP lease will expires \ changes by any mean on DHCP server, it will update corresponding DNS records

Also ensure that secure dynamic update is enabled on domain dns forward lookup zone (domain.com) and all reverse lookup DNS zones, other wise process will fail

Add both of your DHCP servers to DNSUPDATEPROXY group on domain controller
If you added DHCP servers in dnsupdateproxy group, then run below command on dns server
dnscmd /config /OpenAclOnProxyUpdates 0

Find excellent article
https://msmvps.com/blogs/acefekay/archive/2009/08/20/dhcp-dynamic-dns-updates-scavenging-static-entries-amp-timestamps-and-the-dnsproxyupdate-group.aspx

Also set scavenging on any one DNS server properly so that it will delete stale records on regular basis
Also in scavenging set Refresh Interval more than no refresh interval so that DNS will entertain dynamic update queries more time

Check below article to set scavenging properly in relation with DHCP

http://blogs.technet.com/b/askpfe/archive/2011/06/03/how-dns-scavenging-and-the-dhcp-lease-duration-relate.aspx
http://241931348f64b1d1.wordpress.com/2010/11/08/how-to-configure-dns-scavenging-stale-record/
http://www.experts-exchange.com/Networking/Protocols/DNS/Q_28376098.html

Mahesh.
0
 

Author Comment

by:whoam
ID: 40008132
Mahesh,

That first article was great.  This video helped me understand No-Refresh and Refresh Intervals.

Thanks!
0

Featured Post

Gigs: Get Your Project Delivered by an Expert

Select from freelancers specializing in everything from database administration to programming, who have proven themselves as experts in their field. Hire the best, collaborate easily, pay securely and get projects done right.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Scenario:  You do full backups to a internal hard drive in either product (SBS or Server 2008).  All goes well for a very long time.  One day, backups begin to fail with a message that the disk is full.  Your disk contains many, many more backups th…
There have been a lot of times when we have seen the need to enter a large number of DNS entries in a forward lookup zone. The standard procedure would be to launch the DNS Manager console, create the Zone and start adding new hosts using the New…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

775 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question